# Go-FOC G300 ----100V 300A --base on VESC
**URL:** https://foil.zone/t/go-foc-g300-100v-300a-base-on-vesc/16906
**Category:** Buy & Sell
**Tags:** vesc
**Created:** [October 12, 2022, 6:23pm UTC](https://foil.zone/t/go-foc-g300-100v-300a-base-on-vesc/16906 "2022-10-12T18:23:39Z")
**Posts on this page:** 12
**Page:** 1
### Author:  [@makerX-david](https://foil.zone/u/makerX-david)
#### Post date: [October 12, 2022, 6:23pm UTC](https://foil.zone/t/go-foc-g300-100v-300a-base-on-vesc/16906/1 "2022-10-12T18:23:40Z")
[https://www.makerx-tech.com/collections/x-esc/products/go-foc-g300-100v-300a-esc](https://www.makerx-tech.com/collections/x-esc/products/go-foc-g300-100v-300a-esc)
---
### Author:  [@Toto44](https://foil.zone/u/Toto44)
#### Post date: [October 12, 2022, 7:14pm UTC](https://foil.zone/t/go-foc-g300-100v-300a-base-on-vesc/16906/2 "2022-10-12T19:14:14Z")
This is 100% vesc? Which FW is used?
You really can deliver?
Where are you located?
I would like to order
---
### Author:  [@makerX-david](https://foil.zone/u/makerX-david)
#### Post date: [October 12, 2022, 7:33pm UTC](https://foil.zone/t/go-foc-g300-100v-300a-base-on-vesc/16906/3 "2022-10-12T19:33:07Z")
Hi, yes, based on vesc10025, we are located in Shenzhen, China. Now in pre-sale, expected to ship on November 1st
---
### Author:  [@Trampa](https://foil.zone/u/Trampa)
#### Post date: [October 13, 2022, 10:43am UTC](https://foil.zone/t/go-foc-g300-100v-300a-base-on-vesc/16906/4 "2022-10-13T10:43:04Z")
# [Go-FOC G300 —-100V 300A –VESC](https://foil.zone/t/go-foc-g300-100v-300a-vesc/16906)
Why are you advertising it as VESC if it is your own design and it should carry it’s own brand?
---
### Author:  [@mystamo](https://foil.zone/u/mystamo)
#### Post date: [October 16, 2022, 10:58am UTC](https://foil.zone/t/go-foc-g300-100v-300a-base-on-vesc/16906/5 "2022-10-16T10:58:06Z")
The controller has its own named and is based off the VESC fw… VESC is a FW tarampa you know this and Ben Vedder specifically had it in the license that if you use his FW you need to just specify so to meet the license agreements. I’ve designed my own HW around the VESC fw (the easy part BTW) if your using Mr. V’s FOC’s then you might as give him the credits… But you already knew this… You’re just trying to throw shade on MakerX which I’ve used in the past and currently with no problems. Good brand and decent quality.
---
### Author:  [@Trampa](https://foil.zone/u/Trampa)
#### Post date: [October 16, 2022, 11:47am UTC](https://foil.zone/t/go-foc-g300-100v-300a-base-on-vesc/16906/6 "2022-10-16T11:47:29Z")
_Go-FOC G300 —-100V 300A –VESC_ was the original title… Mr. Vedder has pretty clear TM policies regarding the usage of the TM VESC.
OK would be _Maker X Go-FOC—100V 300A ESC - Compatible with VESC-Tool._
---
### Author:  [@makerX-david](https://foil.zone/u/makerX-david)
#### Post date: [November 25, 2022, 1:25pm UTC](https://foil.zone/t/go-foc-g300-100v-300a-base-on-vesc/16906/7 "2022-11-25T13:25:59Z")
BF SALE
Go-FOC G300
10％ OFF Free shipping.
> **[Go-FOC G300](https://www.makerx-tech.com/products/go-foc-g300)**
>
> Feature The new Go-FOC G300 built on VESC. 300A (500A peak)phase current performance Beast. Extremely small volume..High energy density 8 waterproof rubber ring, support the whole body anti-splash. All aluminum alloy shell, super heat...
---
### Author:  [@makerX-david](https://foil.zone/u/makerX-david)
#### Post date: [November 25, 2022, 1:40pm UTC](https://foil.zone/t/go-foc-g300-100v-300a-base-on-vesc/16906/8 "2022-11-25T13:40:42Z")
_The new Go-FOC G300 built on VESC._
_Up to 20KW output capacity._
_Extremely small volume…High energy density_
_18 waterproof rubber ring, support the whole body anti-splash._
_All aluminum alloy shell, super heat dissipation ability._
_High current wiring copper column._
_Wiring harness assembly design makes the body more concise._
_It can be used in electric surfboard, electric go-kart, electric motorcycle, electric boat, fighting robot, joint robot and other high-power brushless motor control fields._
---
### Author:  [@iasen\_vak](https://foil.zone/u/iasen_vak)
#### Post date: [May 3, 2023, 8:32pm UTC](https://foil.zone/t/go-foc-g300-100v-300a-base-on-vesc/16906/9 "2023-05-03T20:32:41Z")
Hello, there seems to be something wrong with your web page. I can’t reach her in any way.
---
### Author:  [@iasen\_vak](https://foil.zone/u/iasen_vak)
#### Post date: [May 3, 2023, 8:34pm UTC](https://foil.zone/t/go-foc-g300-100v-300a-base-on-vesc/16906/10 "2023-05-03T20:34:10Z")
Do you still operational?
---
### Author:  [@tinp123](https://foil.zone/u/tinp123)
#### Post date: [May 3, 2023, 9:34pm UTC](https://foil.zone/t/go-foc-g300-100v-300a-base-on-vesc/16906/11 "2023-05-03T21:34:46Z")
> **[🌴 Go-FOC DV6 / PRO](https://forum.esk8.news/t/go-foc-dv6-pro-high-current-dual-esc/39175/762?u=tinp123)**
>
> Alright, my friend ChatGPT said that I should connect the ground pin of one side to the shield, and that on a CANBUS it should be the receiving end (going to use the side without the PPM receiver as the “receiving” side). So, I will try that and...
see link, there is new website
---
### Author:  [@iasen\_vak](https://foil.zone/u/iasen_vak)
#### Post date: [May 4, 2023, 4:23am UTC](https://foil.zone/t/go-foc-g300-100v-300a-base-on-vesc/16906/12 "2023-05-04T04:23:45Z")
thanks for the information.