# Gong V2 mast bottom piece

**URL:** https://foil.zone/t/gong-v2-mast-bottom-piece/21344
**Category:** Build, Repair & Mod
**Created:** [July 30, 2024, 11:52am UTC](https://foil.zone/t/gong-v2-mast-bottom-piece/21344 "2024-07-30T11:52:45Z")
**Posts on this page:** 1
**Showing post:** 14

<div class="post-metadata">

### Author: ![Foilguy](https://foil.zone/letter_avatar_proxy/v4/letter/f/7cd45c/32.png) [@Foilguy](https://foil.zone/u/Foilguy)
#### Post date: [August 1, 2024, 10:37am UTC](https://foil.zone/t/gong-v2-mast-bottom-piece/21344/14 "2024-08-01T10:37:17Z")

</div>

From @Jacob thread

> [@Gong V2 mast filled with rubber](https://foil.zone/t/gong-v2-mast-filled-with-rubber/21340/11):
>
> Hello, Here are the measurments. Hope its what you need otherwise just tell me and I will get you new ones slightly_smiling_face Should add that the claws of the caliper does not go in perfectly and instead at a slight slight angle when measuring the front to hole distance.

---

_[View the full topic](https://foil.zone/t/gong-v2-mast-bottom-piece/21344)._