# Guzzi's Tow Boogie Build

**URL:** https://foil.zone/t/guzzis-tow-boogie-build/12104
**Category:** Builds
**Created:** [March 10, 2021, 9:16pm UTC](https://foil.zone/t/guzzis-tow-boogie-build/12104 "2021-03-10T21:16:36Z")
**Posts on this page:** 13
**Page:** 1

<div class="post-metadata">

### Author: ![Guzzi](https://foil.zone/letter_avatar_proxy/v4/letter/g/f9ae1b/32.png) [@Guzzi](https://foil.zone/u/Guzzi)
#### Post date: [March 10, 2021, 9:16pm UTC](https://foil.zone/t/guzzis-tow-boogie-build/12104/1 "2021-03-10T21:16:37Z")

</div>

Yet another tow boogie build.

Setup:

Flipsky Combo # FSESC75200 75V and 65161 Motor  
VX1 remote  
4x 6s 5000mAh LiPo

Here some build pix:

 ![Base_Plate_Printer](https://foil.zone/uploads/default/original/3X/2/8/28644d3beb6854053b09fb82e290ce4516d21173.jpeg) ![Board_Mast_marriage](https://foil.zone/uploads/default/original/3X/4/2/429edacc0e7983992f759d8bfeff2d2f4c933441.jpeg) ![Electronic_Box](https://foil.zone/uploads/default/original/3X/d/8/d85821c9aa539e0bc76a3b658e5135aa3eba209f.jpeg) ![Mast](https://foil.zone/uploads/default/original/3X/3/c/3ce57ce3f9c72c63d6c8e6c34c05d9d54215ee71.jpeg) ![Prop_Balance](https://foil.zone/uploads/default/original/3X/c/6/c6310e4e95ebc9a27b532034b580919cc520e901.jpeg) ![Tow_Boogie_1](https://foil.zone/uploads/default/original/3X/c/9/c95f7c4fe1117eef5112b094e395cf7f9ee0dd80.jpeg) ![Tow_Boogie_2](https://foil.zone/uploads/default/original/3X/0/b/0bb5a91af8e63cb2d009d857720869a68935913d.jpeg) ![Tow_Boogie_3](https://foil.zone/uploads/default/original/3X/e/0/e0efbf85e45f2ebbe208e119f2bc571f04820b7a.jpeg)

---

<div class="post-metadata">

### Author: ![Alexandre](https://foil.zone/user_avatar/foil.zone/alexandre/32/2884_2.png) [@Alexandre](https://foil.zone/u/Alexandre)
#### Post date: [March 11, 2021, 8:03am UTC](https://foil.zone/t/guzzis-tow-boogie-build/12104/2 "2021-03-11T08:03:43Z")

</div>

Very nice , I would secure the belt to the box to avoid sliding if the board jump or fall hard

---

<div class="post-metadata">

### Author: ![kurtsk8board](https://foil.zone/letter_avatar_proxy/v4/letter/k/49beb7/32.png) [@kurtsk8board](https://foil.zone/u/kurtsk8board)
#### Post date: [March 13, 2021, 1:09am UTC](https://foil.zone/t/guzzis-tow-boogie-build/12104/3 "2021-03-13T01:09:37Z")

</div>

Hi,  
I am getting the parts together to do my own build. I am very new to this type of endeavor and was wondering if you would mind sharing the prop/mast/motor mount 3d files. I am looking to get a printer to make these parts for my build.

Thanks!

---

<div class="post-metadata">

### Author: ![Valhalla](https://foil.zone/letter_avatar_proxy/v4/letter/v/839c29/32.png) [@Valhalla](https://foil.zone/u/Valhalla)
#### Post date: [March 13, 2021, 5:36am UTC](https://foil.zone/t/guzzis-tow-boogie-build/12104/4 "2021-03-13T05:36:09Z")

</div>

What was your method of anchoring the hooks for the straps?

---

<div class="post-metadata">

### Author: ![Guzzi](https://foil.zone/letter_avatar_proxy/v4/letter/g/f9ae1b/32.png) [@Guzzi](https://foil.zone/u/Guzzi)
#### Post date: [March 14, 2021, 2:26pm UTC](https://foil.zone/t/guzzis-tow-boogie-build/12104/5 "2021-03-14T14:26:46Z")

</div>

Hi, I will share my designs when I tested the tow boogie. I’m still tinkering with the impeller setup. Be aware I do have a pretty large 3d printer so my files are not really usable if you own a small printer.

---

<div class="post-metadata">

### Author: ![Guzzi](https://foil.zone/letter_avatar_proxy/v4/letter/g/f9ae1b/32.png) [@Guzzi](https://foil.zone/u/Guzzi)
#### Post date: [March 14, 2021, 2:27pm UTC](https://foil.zone/t/guzzis-tow-boogie-build/12104/6 "2021-03-14T14:27:46Z")

</div>

I just epoxied some left over straps into the board foam. Works pretty reliable.

---

<div class="post-metadata">

### Author: ![Jatem](https://foil.zone/letter_avatar_proxy/v4/letter/j/9f8e36/32.png) [@Jatem](https://foil.zone/u/Jatem)
#### Post date: [April 2, 2021, 8:44am UTC](https://foil.zone/t/guzzis-tow-boogie-build/12104/7 "2021-04-02T08:44:31Z")

</div>

Nice looking 3d print designs. How is testing going? I’m interested in your prop and guard, and how much run time you’re getting.

---

<div class="post-metadata">

### Author: ![Jatem](https://foil.zone/letter_avatar_proxy/v4/letter/j/9f8e36/32.png) [@Jatem](https://foil.zone/u/Jatem)
#### Post date: [May 30, 2021, 1:16am UTC](https://foil.zone/t/guzzis-tow-boogie-build/12104/8 "2021-05-30T01:16:13Z")

</div>

Any testing results, how does the 3d printed mast plate handle the stress/weight of the motor?

---

<div class="post-metadata">

### Author: ![loveefoils](https://foil.zone/letter_avatar_proxy/v4/letter/l/48db29/32.png) [@loveefoils](https://foil.zone/u/loveefoils)
#### Post date: [May 30, 2021, 3:31am UTC](https://foil.zone/t/guzzis-tow-boogie-build/12104/9 "2021-05-30T03:31:01Z")

</div>

Really cool build. i was wondering about you choice of remote the flipsky VX1 instead of the water proof VX3, are you planing to take apart the VX1 and make it water proof??

---

<div class="post-metadata">

### Author: ![Guzzi](https://foil.zone/letter_avatar_proxy/v4/letter/g/f9ae1b/32.png) [@Guzzi](https://foil.zone/u/Guzzi)
#### Post date: [June 20, 2021, 9:02pm UTC](https://foil.zone/t/guzzis-tow-boogie-build/12104/10 "2021-06-20T21:02:36Z")

</div>

yes I waterproofed it already

---

<div class="post-metadata">

### Author: ![Guzzi](https://foil.zone/letter_avatar_proxy/v4/letter/g/f9ae1b/32.png) [@Guzzi](https://foil.zone/u/Guzzi)
#### Post date: [June 20, 2021, 9:03pm UTC](https://foil.zone/t/guzzis-tow-boogie-build/12104/11 "2021-06-20T21:03:38Z")

</div>

well i did test it, unfortunately the torque is to great and it flips over before i get real speed. So I’m currently designing a ducted prop with stator. Will keep you posted.

---

<div class="post-metadata">

### Author: ![tflynn](https://foil.zone/letter_avatar_proxy/v4/letter/t/a8b319/32.png) [@tflynn](https://foil.zone/u/tflynn)
#### Post date: [March 27, 2022, 2:38pm UTC](https://foil.zone/t/guzzis-tow-boogie-build/12104/12 "2022-03-27T14:38:07Z")

</div>

@Guzzi how did your build go?

---

<div class="post-metadata">

### Author: ![BenW](https://foil.zone/letter_avatar_proxy/v4/letter/b/8edcca/32.png) [@BenW](https://foil.zone/u/BenW)
#### Post date: [August 31, 2023, 4:12am UTC](https://foil.zone/t/guzzis-tow-boogie-build/12104/13 "2023-08-31T04:12:32Z")

</div>

any updates on this and the 3-d printed files? looks pretty great to me. we have a similar setup, the thing that saved us from flipping was to us a much larger board and place the prop in the center.
