# HGLTECH HI200 75V 200A ESC Base On Vesc With Water Cooling Enclosure For E-Foil
**URL:** https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773
**Category:** Commercial Ads/Vendors
**Created:** [September 18, 2020, 11:12am UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773 "2020-09-18T11:12:20Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@HGL-Tech](https://foil.zone/u/HGL-Tech)
#### Post date: [September 18, 2020, 11:12am UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/1 "2020-09-18T11:12:20Z")
HGLTECH HI200 75V High Current 200A ESC Base On Vesc With Water Cooling Enclosure For E-Foil
**Spec:**
- Voltage:14-75V( safe for 3-16S)
- Continuous Current : 200A
- Max Current :300A
- Supported sensors: ABI, HALL, AS5047,AS5048A
- EPRM:150000
**Feature:**
- Regenerative braking
- Sensored or sensorless operation + hybrid mode
- Configurable RPM-, current-, voltage- and power limits
- Input source: PPM, Analog, NRF Nyko Kama Nunchuck
- Communication ports: USB, CAN, UART
- Throttle curve and ramping for all input sources
- Seamless 4-quadrant operation
- Motor revolution, amp hour, watt hour counting
- Real time data analysis and read out via communication ports
- Adjustable protection against:
- Low input voltage
- High input voltage
- High motor current
- High input current
- High regenerative braking current (separate limits for the motor and the input)
- High RPM (separate limits for each direction)
- Digital VCC and analog VCC are produced by different voltage regulators respectively to make the system AD conversion more accurate
- Motor wire: 8AWG
- Power cable: 10AWG
    
Get yours here:[https://www.gd-hgl.com/products/hgltech-hi200-75v-high-current-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil](https://www.gd-hgl.com/products/hgltech-hi200-75v-high-current-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil)
---
### Author:  [@Vitalii](https://foil.zone/u/Vitalii)
#### Post date: [September 18, 2020, 11:15am UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/2 "2020-09-18T11:15:37Z")
> [@HGL-Tech](#):
>
> Get yours here:[https://www.gd-hgl.com/products/hgltech-hi200-75v-high-current-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil](https://www.gd-hgl.com/products/hgltech-hi200-75v-high-current-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil)
It’s “sold out” and even not mentioned the price 🤨
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [September 18, 2020, 11:16am UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/3 "2020-09-18T11:16:35Z")
You probably shouldn’t have brought the connectors out the top. How will anyone close their hatches now?
---
### Author:  [@HGL-Tech](https://foil.zone/u/HGL-Tech)
#### Post date: [September 18, 2020, 11:18am UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/4 "2020-09-18T11:18:45Z")
the price is updated now
---
### Author:  [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [September 18, 2020, 11:31am UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/5 "2020-09-18T11:31:16Z")
The ESC can be rotated by 90 degrees. That side is only 52mm high under a 80+mm high hatch. A 30mm radius is OK to me. The wires can be horizontal if the water in-outlets are pointing upwards.
---
### Author:  [@theone](https://foil.zone/u/theone)
#### Post date: [September 18, 2020, 12:49pm UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/6 "2020-09-18T12:49:39Z")
One advantage could be the power cables are not competing for space with the cooling tubes ?
---
### Author:  [@Foxyirish1987](https://foil.zone/u/Foxyirish1987)
#### Post date: [September 18, 2020, 6:00pm UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/7 "2020-09-18T18:00:56Z")
Come down below the 300 mark and bring the powercBles out on the horizontal and you’ll be onto a big winner!
---
### Author:  [@HGL-Tech](https://foil.zone/u/HGL-Tech)
#### Post date: [September 24, 2020, 9:10am UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/8 "2020-09-24T09:10:39Z")
it seems so,yet it needs to be proven.
---
### Author:  [@HGL-Tech](https://foil.zone/u/HGL-Tech)
#### Post date: [September 24, 2020, 9:11am UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/9 "2020-09-24T09:11:33Z")
could you pls expain your suggestion a bit,thanks
---
### Author:  [@jkoljo](https://foil.zone/u/jkoljo)
#### Post date: [September 24, 2020, 9:17am UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/10 "2020-09-24T09:17:56Z")
The point is to make it a bit cheaper than 300 USD and make the cables run horizontally.
---
### Author:  [@theone](https://foil.zone/u/theone)
#### Post date: [September 24, 2020, 9:46am UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/11 "2020-09-24T09:46:20Z")
The last time a committee designed a race horse a camel was born.
---
### Author:  [@HGL-Tech](https://foil.zone/u/HGL-Tech)
#### Post date: [September 24, 2020, 10:11am UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/12 "2020-09-24T10:11:27Z")
We can make it $319 and one extra vx2 remote to be shipped if you order via this link,[HGLTECH 200A](https://www.gd-hgl.com/products/hgltech-hi200-75v-high-current-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil?_pos=5&_sid=9661b93d5&_ss=r)
---
### Author:  [@heddan99](https://foil.zone/u/heddan99)
#### Post date: [September 24, 2020, 12:05pm UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/13 "2020-09-24T12:05:03Z")
Have anyone tried vx2 remote for efoil?
I only tested it once, and it was a terrible experience.
How can you say it is for efoil when it is not waterprotected at all and add it to a vesc specially made for efoil/water?
Probably better and More fait to lower the price 30-40 dollar instead.
---
### Author:  [@HGL-Tech](https://foil.zone/u/HGL-Tech)
#### Post date: [September 25, 2020, 1:34am UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/14 "2020-09-25T01:34:50Z")
we just add the remote for extra free gift,you can use it for esk8.About the discount,we are having flash sale promotion ,pls stay tuned on [https://www.gd-hgl.com/](https://www.gd-hgl.com/)
Thanks.
---
### Author:  [@Toto44](https://foil.zone/u/Toto44)
#### Post date: [September 25, 2020, 7:59am UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/15 "2020-09-25T07:59:55Z")
# HGLTECH 2.4Ghz PPM YK01 remote control
Does this one have a “joystick” with poti or hall sensor on the stick?
---
### Author:  [@HGL-Tech](https://foil.zone/u/HGL-Tech)
#### Post date: [September 25, 2020, 10:07am UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/17 "2020-09-25T10:07:36Z")
yes,its joystick is with piti
---
### Author:  [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [September 26, 2020, 1:33pm UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/19 "2020-09-26T13:33:13Z")
Would you have some pictures of this test session ?
---
### Author:  [@brycej](https://foil.zone/u/brycej)
#### Post date: [September 26, 2020, 3:02pm UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/20 "2020-09-26T15:02:38Z")
Why is their customer service better than any other company did you have an issue?
Or did you work in their customer service? 😂
---
### Author:  [@Vicdes2](https://foil.zone/u/Vicdes2)
#### Post date: [September 26, 2020, 3:03pm UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/21 "2020-09-26T15:03:51Z")
Looks like HGLTech might be taking their promotion on this forum a bit too far! That person joined 5 hours ago and has 3min of read time…
---
### Author:  [@Felixfoiler](https://foil.zone/u/Felixfoiler)
#### Post date: [September 26, 2020, 3:33pm UTC](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773/22 "2020-09-26T15:33:10Z")
If HGL-TECH is advertising with multiple accounts and trying to give out fake reviwes, i wouldnt be very surprised
[Next page](https://foil.zone/t/hgltech-hi200-75v-200a-esc-base-on-vesc-with-water-cooling-enclosure-for-e-foil/9773.md?page=2)