# Infiltrazioni di acqua

**URL:** https://foil.zone/t/infiltrazioni-di-acqua/8326
**Category:** Foils & Boards
**Created:** [June 28, 2020, 8:37am UTC](https://foil.zone/t/infiltrazioni-di-acqua/8326 "2020-06-28T08:37:35Z")
**Posts on this page:** 1
**Showing post:** 8

<div class="post-metadata">

### Author: ![SoEFoil](https://foil.zone/user_avatar/foil.zone/soefoil/32/55_2.png) [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [June 28, 2020, 8:31pm UTC](https://foil.zone/t/infiltrazioni-di-acqua/8326/8 "2020-06-28T20:31:22Z")

</div>

You have the @michion solution seen [here](https://efoil.builders/t/michions-build/2625/70?u=soefoil): pouring degased mold star 30 silicone from Smooth On into the gap between board and hatch.

> **[Flightjunkie's first e-foil build](https://foil.zone/t/flightjunkies-first-e-foil-build/6248/237)**
>
> All my seals are smooth on mold star 30. My current built hatch seals so well that I could not close it without some kind of vent. Positive air pressure! It vents through the thumb screw point when not tightened now.

 ![](https://efoil.builders/uploads/default/original/2X/d/d67794d2e73eab532af85920d88a91395211e609.png)

… foe a sleek and seamless result:  
 ![](https://foil.zone/uploads/default/original/2X/d/dd62a4eae18a4cfb34eb4101ac5a522bb5a2c8a2.jpeg)

---

_[View the full topic](https://foil.zone/t/infiltrazioni-di-acqua/8326)._