# Motor mount GONG V2 alu mast and flipsky 65161+water cooled

**URL:** https://foil.zone/t/motor-mount-gong-v2-alu-mast-and-flipsky-65161-water-cooled/20598
**Category:** efoils – Electric Hydrofoil Surfboards
**Created:** [April 26, 2024, 5:56pm UTC](https://foil.zone/t/motor-mount-gong-v2-alu-mast-and-flipsky-65161-water-cooled/20598 "2024-04-26T17:56:03Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![Foilguy](https://foil.zone/letter_avatar_proxy/v4/letter/f/7cd45c/32.png) [@Foilguy](https://foil.zone/u/Foilguy)
#### Post date: [April 26, 2024, 8:12pm UTC](https://foil.zone/t/motor-mount-gong-v2-alu-mast-and-flipsky-65161-water-cooled/20598/2 "2024-04-26T20:12:09Z")

</div>

Have a look at this thread.

> [@FS65161 motor mounts for Gong V1 and V2 masts](https://foil.zone/t/fs65161-motor-mounts-for-gong-v1-and-v2-masts/16920):
>
> Hi! I would like to share my FS65161 motor mount for the Gong V1 mast, that I created for my own eFoil build. This motor mount can be assembled without removing the motor wires from the mast. It supports a few additional features, such as water cooling, reinforcements and ducts. More about those in the second post. I have been running this base setup for the past summer, and it has worked great! It is absolutely solid, with excellent efficiency thanks to the smooth profile. I am using a 6" FR …

---

_[View the full topic](https://foil.zone/t/motor-mount-gong-v2-alu-mast-and-flipsky-65161-water-cooled/20598)._