# Motor pod for Bambulab A1 mini (18cm max)
**URL:** https://foil.zone/t/motor-pod-for-bambulab-a1-mini-18cm-max/23570
**Category:** Build, Repair & Mod
**Created:** [May 9, 2025, 4:55pm UTC](https://foil.zone/t/motor-pod-for-bambulab-a1-mini-18cm-max/23570 "2025-05-09T16:55:52Z")
**Posts on this page:** 9
**Page:** 1
### Author:  [@poloswindsurf](https://foil.zone/u/poloswindsurf)
#### Post date: [May 9, 2025, 4:55pm UTC](https://foil.zone/t/motor-pod-for-bambulab-a1-mini-18cm-max/23570/1 "2025-05-09T16:55:52Z")
Hi,
3D creation is difficult for me. I’m looking for tow pods, for Flipsky 6384.
The ones I saw on the forum exceed 18cm max of my 3D printer.
Thanks a lot 🙂
---
### Author:  [@KONUTZ](https://foil.zone/u/KONUTZ)
#### Post date: [May 9, 2025, 6:13pm UTC](https://foil.zone/t/motor-pod-for-bambulab-a1-mini-18cm-max/23570/2 "2025-05-09T18:13:07Z")
There are quite a few designs on here which can be printed easily on a 180 x 180 print bed using the A1…i have an A1 mini and have printed these no problem. I think you need to understand that most motor pods come in 2 pieces and as such can easily be printed vertically to get what you need… it.might also be useful.to have a play with the bambuu slicer program which you use in conjunction with the A1 to see how you can do this…it is a good learning experience for future use… in terms of getting a 3d designed pod for your needs check out all the “faux drive” threads…im sure you will find something that fits your mast and the 6374 as this engine is pretty much the standard motor used for these projects.
K
---
### Author:  [@rttn](https://foil.zone/u/rttn)
#### Post date: [May 9, 2025, 6:43pm UTC](https://foil.zone/t/motor-pod-for-bambulab-a1-mini-18cm-max/23570/3 "2025-05-09T18:43:00Z")
What mast do you have?
---
### Author:  [@poloswindsurf](https://foil.zone/u/poloswindsurf)
#### Post date: [May 9, 2025, 7:33pm UTC](https://foil.zone/t/motor-pod-for-bambulab-a1-mini-18cm-max/23570/4 "2025-05-09T19:33:55Z")
I have no mast, I prefer to print mast and pod, my message was not clear sorry
---
### Author:  [@rttn](https://foil.zone/u/rttn)
#### Post date: [May 9, 2025, 8:56pm UTC](https://foil.zone/t/motor-pod-for-bambulab-a1-mini-18cm-max/23570/5 "2025-05-09T20:56:00Z")
If this is what you are looking for, please let me know your email.
---
### Author:  [@poloswindsurf](https://foil.zone/u/poloswindsurf)
#### Post date: [May 9, 2025, 9:43pm UTC](https://foil.zone/t/motor-pod-for-bambulab-a1-mini-18cm-max/23570/6 "2025-05-09T21:43:44Z")
Yes !
My email is my pseudo on foil zone, followed by “@free.fr”
thanks
---
### Author:  [@poloswindsurf](https://foil.zone/u/poloswindsurf)
#### Post date: [May 13, 2025, 12:44am UTC](https://foil.zone/t/motor-pod-for-bambulab-a1-mini-18cm-max/23570/7 "2025-05-13T00:44:51Z")
Rttn, the correct size for the 4 screws is M4 15mm ? Thanks
---
### Author:  [@rttn](https://foil.zone/u/rttn)
#### Post date: [May 14, 2025, 1:26am UTC](https://foil.zone/t/motor-pod-for-bambulab-a1-mini-18cm-max/23570/8 "2025-05-14T01:26:12Z")
You are absolutely right…
---
### Author:  [@poloswindsurf](https://foil.zone/u/poloswindsurf)
#### Post date: [May 14, 2025, 7:42pm UTC](https://foil.zone/t/motor-pod-for-bambulab-a1-mini-18cm-max/23570/9 "2025-05-14T19:42:26Z")
At the first try, not on the water…
Printed with PETG (new roll). I don’t know very well 3D impression.
Could you help me ? Thanks