# Naish 26 Mast clamp STL files

**URL:** https://foil.zone/t/naish-26-mast-clamp-stl-files/17282
**Category:** Props & Ducts
**Created:** [January 10, 2023, 1:29am UTC](https://foil.zone/t/naish-26-mast-clamp-stl-files/17282 "2023-01-10T01:29:20Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![tkramer](https://foil.zone/letter_avatar_proxy/v4/letter/t/eb9ed0/32.png) [@tkramer](https://foil.zone/u/tkramer)
#### Post date: [January 10, 2023, 1:29am UTC](https://foil.zone/t/naish-26-mast-clamp-stl-files/17282/1 "2023-01-10T01:29:20Z")

</div>

Hello efoil builders. I am working on my first foil assist build. I just bought an Ender 3 printer and getting used to it. So far I have gotten a couple of prints like the mast clamp for Axis mast and the prop mounts for the Flipsky 65111 motor. I am wondering if anyone has an STL for the Naish 26 aluminum mast clamp that will work with the above motor?

One more question: what print settings are folks using for the folding props? So far all of my prints fail near the blade print. Wish there was a way I could share my settings from Cura slicer.

Thanks in advance for any input or files you may have.

Tod