# Need ESC plate dimensions - ESC mounting issue between Cruising 1 and Cruising 2 TAKUMA
**URL:** https://foil.zone/t/need-esc-plate-dimensions-esc-mounting-issue-between-cruising-1-and-cruising-2-takuma/23458
**Category:** efoils – Electric Hydrofoil Surfboards
**Created:** [April 26, 2025, 5:09pm UTC](https://foil.zone/t/need-esc-plate-dimensions-esc-mounting-issue-between-cruising-1-and-cruising-2-takuma/23458 "2025-04-26T17:09:54Z")
**Posts on this page:** 5
**Page:** 1
### Author:  [@felix971](https://foil.zone/u/felix971)
#### Post date: [April 26, 2025, 5:09pm UTC](https://foil.zone/t/need-esc-plate-dimensions-esc-mounting-issue-between-cruising-1-and-cruising-2-takuma/23458/1 "2025-04-26T17:09:54Z")
Hi everyone,
I could really use your help!
I recently bought from a shop a Takuma Cruising eFoil, but there was a problem: They give me everything in Version 2\*\* (new mini ESC, V2 mast, etc.) **except the board** , which is still a **Version 1** … Unfortunately, the shop didn’t mention this incompatibility.
Now, the issue I’m facing is that **the ESC mounting plate** is **not compatible** between the Cruising 1 and the Cruising 2.
The hole positions and plate dimensions are different.
I would like to **3D print a plate**.
Would anyone happen to have **the exact dimensions** of the ESC mounting plate for the Cruising 2 ?
Or maybe a drawing, or an STL file that I could use to create the piece?
Here’s a photo of my current plate, I added arrows showing where the screw positions don’t match the new mini ESC on the V2.
Thank you so much in advance for any help! 🙏
---
### Author:  [@Foilguy](https://foil.zone/u/Foilguy)
#### Post date: [April 26, 2025, 8:51pm UTC](https://foil.zone/t/need-esc-plate-dimensions-esc-mounting-issue-between-cruising-1-and-cruising-2-takuma/23458/2 "2025-04-26T20:51:18Z")
Maybe @aussieatlarge can help you.
---
### Author:  [@aussieatlarge](https://foil.zone/u/aussieatlarge)
#### Post date: [April 27, 2025, 1:23am UTC](https://foil.zone/t/need-esc-plate-dimensions-esc-mounting-issue-between-cruising-1-and-cruising-2-takuma/23458/3 "2025-04-27T01:23:15Z")
I no longer have my Cruising 2. I have a Carver 2. I transferred all my electronics over from my Cruiser. I don’t recall if I transferred over the mounting plate. I am about to take the ESC apart so will reate an all file for you.
---
### Author:  [@aussieatlarge](https://foil.zone/u/aussieatlarge)
#### Post date: [April 27, 2025, 3:21am UTC](https://foil.zone/t/need-esc-plate-dimensions-esc-mounting-issue-between-cruising-1-and-cruising-2-takuma/23458/4 "2025-04-27T03:21:08Z")
---
### Author:  [@felix971](https://foil.zone/u/felix971)
#### Post date: [April 28, 2025, 7:03am UTC](https://foil.zone/t/need-esc-plate-dimensions-esc-mounting-issue-between-cruising-1-and-cruising-2-takuma/23458/5 "2025-04-28T07:03:03Z")
Hello! Thank you so much for your help, but unfortunately, I don’t think this is the right one. Here’s a photo of mine!
I guess you no longer have your board, and there’s no way to recover the old plate, right?
I’m definitely on the lookout if anyone happens to have a plate they could give or sell, or even just share the exact measurements with me.
Also, if I really have no other option, I might try to find someone in France who could lend me one temporarily so I can get it 3D scanned.
Do you think removing the plate could damage the board in any way?
P.S.: Here’s the photo I forgot to attach earlier!
Thanks a lot for all your help!