# Need some help on motor config and app config for Flypsky 65161 motor with FSESC75200 75V

**URL:** https://foil.zone/t/need-some-help-on-motor-config-and-app-config-for-flypsky-65161-motor-with-fsesc75200-75v/12047
**Category:** Builds
**Created:** [March 4, 2021, 4:44am UTC](https://foil.zone/t/need-some-help-on-motor-config-and-app-config-for-flypsky-65161-motor-with-fsesc75200-75v/12047 "2021-03-04T04:44:06Z")
**Posts on this page:** 1
**Showing post:** 3

<div class="post-metadata">

### Author: ![3rd\_ave\_Lien](https://foil.zone/user_avatar/foil.zone/3rd_ave_lien/32/17688_2.png) [@3rd\_ave\_Lien](https://foil.zone/u/3rd_ave_Lien)
#### Post date: [March 6, 2021, 8:10pm UTC](https://foil.zone/t/need-some-help-on-motor-config-and-app-config-for-flypsky-65161-motor-with-fsesc75200-75v/12047/3 "2021-03-06T20:10:28Z")

</div>

From another builder:

> Yeah, unfortunately I don’t have configs to give you either, since I haven’t tested it with full power yet. It is possible to tune the saturation compensation, try 10% or 15%. You can also try to increase FOC observer gain. Some people had luck with 30-\>60.

Benjamin also noted in the VESC forum about their 75/300:

> “One known issue with the 75/300 is that is measures the flux linkage too high on some motors. Try decreasing the flux linkage with 5 - 50% and see if it helps.”  
> [https://foil.zone/t/has-anyone-successfully-used-the-flipsky-fsesc-75200-with-the-fs65161-motor/12052/8](https://foil.zone/t/has-anyone-successfully-used-the-flipsky-fsesc-75200-with-the-fs65161-motor/12052/8)

---

_[View the full topic](https://foil.zone/t/need-some-help-on-motor-config-and-app-config-for-flypsky-65161-motor-with-fsesc75200-75v/12047)._