# New ESC and remote for Takuma Carver

**URL:** https://foil.zone/t/new-esc-and-remote-for-takuma-carver/26585
**Category:** Build, Repair & Mod
**Created:** [June 12, 2026, 1:56am UTC](https://foil.zone/t/new-esc-and-remote-for-takuma-carver/26585 "2026-06-12T01:56:42Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![Bluefoil](https://foil.zone/letter_avatar_proxy/v4/letter/b/e95f7d/32.png) [@Bluefoil](https://foil.zone/u/Bluefoil)
#### Post date: [June 12, 2026, 1:56am UTC](https://foil.zone/t/new-esc-and-remote-for-takuma-carver/26585/1 "2026-06-12T01:56:43Z")

</div>

Hey guys,

I recently picked up a 2021 Takuma carver from marketplace for cheap but it didn’t come with a battery or original remote. The remote that came with it is a Pulseer remote that won’t pair with the board.

Is there any way to use the Pulseer remote without buying a Pulseer E-Box? The E-Box is around $1,900, and I’m trying to get the board running as cheaply as possible.

At this stage I’m leaning towards replacing everything with a new ESC, remote, and 12S battery setup. I was looking at either a Flipsky or Maytech VESC-based system to run the original 3000W Takuma motor.

Has anyone done a similar conversion on a Takuma Carver? Any recommendations on ESCs and remotes would be greatly appreciated.

Thanks!

 ![IMG_6268.HEIC](https://foil.zone/uploads/default/original/3X/b/6/b6420243edc0c4e5cee34691ba766d28aaf255bb.jpeg)

---

<div class="post-metadata">

### Author: ![mattgalic](https://foil.zone/user_avatar/foil.zone/mattgalic/32/11236_2.png) [@mattgalic](https://foil.zone/u/mattgalic)
#### Post date: [June 12, 2026, 7:09am UTC](https://foil.zone/t/new-esc-and-remote-for-takuma-carver/26585/2 "2026-06-12T07:09:01Z")

</div>

Takuma remote was built with BB Talkin. You coudl try to contact them to know if they’d help.

> **[BbTalkin Europe | Waterproof Bluetooth Intercoms](https://bb-talkin.eu/)**
>
> BbTalkin Europe. Waterproof Bluetooth intercoms for surfing, kitesurfing, sailing and rescue teams. IPX7 sealed, 1000m range, 14hr battery. EU 2-5 day shipping.

---

<div class="post-metadata">

### Author: ![DutchFoiler](https://foil.zone/letter_avatar_proxy/v4/letter/d/c0e974/32.png) [@DutchFoiler](https://foil.zone/u/DutchFoiler)
#### Post date: [June 12, 2026, 9:13am UTC](https://foil.zone/t/new-esc-and-remote-for-takuma-carver/26585/3 "2026-06-12T09:13:56Z")

</div>

Cheapest would be to go full Flipsky.

Would not even bother with an original takuma remote, they had these weird jog wheels on the remote. Also, if breaks, you can go down the rabbit hole again.

---

<div class="post-metadata">

### Author: ![Jb69](https://foil.zone/letter_avatar_proxy/v4/letter/j/ba9def/32.png) [@Jb69](https://foil.zone/u/Jb69)
#### Post date: [September 9, 2026, 7:23pm UTC](https://foil.zone/t/new-esc-and-remote-for-takuma-carver/26585/4 "2026-09-09T19:23:19Z")

</div>

I replaced the Takuma esc with a flipsky esc just recently. Great addition is the ble connection to monitor and tune it from your phone

> [@Bringing a Dead Takuma Cruiser V1 Back to Life](https://foil.zone/t/bringing-a-dead-takuma-cruiser-v1-back-to-life/27157/1):
>
> Flipsky Mini FSESC 6.8 60V/100A

 ![IMG_3856](https://foil.zone/uploads/default/original/3X/6/9/6944ca2347eda80acaeebaefb1c37299d55d9cc1.jpeg)

[https://foil.zone/t/bringing-a-dead-takuma-cruiser-v1-back-to-life/27157](https://foil.zone/t/bringing-a-dead-takuma-cruiser-v1-back-to-life/27157)