# New propeller from flipsky 120mm
**URL:** https://foil.zone/t/new-propeller-from-flipsky-120mm/17560
**Category:** Propulsion System (Motor, Gears)
**Created:** [February 15, 2023, 1:39pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560 "2023-02-15T13:39:42Z")
**Posts on this page:** 14
**Page:** 1
### Author:  [@windego](https://foil.zone/u/windego)
#### Post date: [February 15, 2023, 1:39pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560/1 "2023-02-15T13:39:42Z")
> **[Nylon Motor Boat Propellers 3.8 Inches Electric Engine Outboard Propeller For...](https://flipsky.net/collections/accessories/products/nylon-motor-boat-propellers-3-8inches-electric-engine-outboard-propeller-for-flipsky-65111-brushless-motor)**
>
> Specs: Material:Nylon Diameter: ∅120mm Pitch: 96mm Suitable For Flipsky 65111 motor
What do you propeller gurus think about this one? I received the 7 1/4 with my 65161 motor and plan to cut it to 140mm as suggested. But for $45 I may just get one of these.
---
### Author:  [@windego](https://foil.zone/u/windego)
#### Post date: [February 15, 2023, 2:58pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560/2 "2023-02-15T14:58:48Z")
I see its 10mm shaft ☹
---
### Author:  [@Larsb](https://foil.zone/u/Larsb)
#### Post date: [February 15, 2023, 3:02pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560/3 "2023-02-15T15:02:07Z")
You could use a 1mm shaft sleeve on the 8mm portion of the shaft. Not optimal but will likely work OK.
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [February 15, 2023, 3:55pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560/4 "2023-02-15T15:55:36Z")
A 3.7" pitch prop 🤣
Thats going to run super slowly!
---
### Author:  [@Ackermann](https://foil.zone/u/Ackermann)
#### Post date: [February 15, 2023, 4:13pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560/5 "2023-02-15T16:13:51Z")
Could be good for 190kv motor @nice2cu
---
### Author:  [@windego](https://foil.zone/u/windego)
#### Post date: [February 15, 2023, 4:29pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560/6 "2023-02-15T16:29:01Z")
Thanks guys. So for the 65161 120k the ideal prop size and pitch is?
---
### Author:  [@nice2cu](https://foil.zone/u/nice2cu)
#### Post date: [February 15, 2023, 5:08pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560/7 "2023-02-15T17:08:49Z")
For an Jetdrive!
Diameter ok, but the pitch 😱
---
### Author:  [@Ackermann](https://foil.zone/u/Ackermann)
#### Post date: [February 15, 2023, 5:24pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560/8 "2023-02-15T17:24:04Z")
7" or 6". Depends also on your S (battery setup)
---
### Author:  [@windego](https://foil.zone/u/windego)
#### Post date: [February 15, 2023, 5:28pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560/9 "2023-02-15T17:28:51Z")
Thanks I have 12s12p samsung 30q. Efoil using core sls1250cm2.
---
### Author:  [@Ackermann](https://foil.zone/u/Ackermann)
#### Post date: [February 15, 2023, 10:15pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560/10 "2023-02-15T22:15:59Z")
7" I would chose.
I am driving this and it’s fine. Also I am not the lightest drivers and my board is not the biggest but still i manage to start
---
### Author:  [@windego](https://foil.zone/u/windego)
#### Post date: [March 15, 2023, 4:49pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560/11 "2023-03-15T16:49:11Z")
Flipsky tech told me they are working on a new prop for the 65161 but its still not ready yet.
---
### Author:  [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [March 15, 2023, 6:31pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560/12 "2023-03-15T18:31:58Z")
Haha they mean the factory that does the motor is…
---
### Author:  [@windego](https://foil.zone/u/windego)
#### Post date: [March 15, 2023, 6:47pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560/13 "2023-03-15T18:47:54Z")
Yes I don’t know who actually makes these but seem like several labels on same stuff for sure.
---
### Author:  [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [March 15, 2023, 7:35pm UTC](https://foil.zone/t/new-propeller-from-flipsky-120mm/17560/14 "2023-03-15T19:35:49Z")
At 45usd, it is the same price as the proven Fliteboard prop…
Hopefully the new one will look like Kedean’s …
