# Nibblers Build from Germany **URL:** https://foil.zone/t/nibblers-build-from-germany/4271 **Category:** Builds **Created:** [April 17, 2019, 7:10pm UTC](https://foil.zone/t/nibblers-build-from-germany/4271 "2019-04-17T19:10:57Z") **Posts on this page:** 1 **Showing post:** 5
### Author: ![Nibbler](https://foil.zone/letter_avatar_proxy/v4/letter/n/b3f665/32.png) [@Nibbler](https://foil.zone/u/Nibbler) #### Post date: [April 19, 2019, 10:46am UTC](https://foil.zone/t/nibblers-build-from-germany/4271/5 "2019-04-19T10:46:14Z")
Sure, inside there is a 3s lipo for the Wireless VA meter and a BEC for the sender. Unfortunatly it is not possible to log the data. The shunt could measure a current up to 300A. The trigger an trimmer are potis with radial shaft seals. The best point about the VA meter is that you can display the ECU temperature and you also will see live the motor current. In case of a defect of the gear or something like that the current would rise . Greetings --- _[View the full topic](https://foil.zone/t/nibblers-build-from-germany/4271)._