# Northern Germany build

**URL:** https://foil.zone/t/northern-germany-build/1888
**Category:** Builds
**Created:** [June 6, 2018, 10:18am UTC](https://foil.zone/t/northern-germany-build/1888 "2018-06-06T10:18:47Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Levelnull](https://foil.zone/user_avatar/foil.zone/levelnull/32/2532_2.png) [@Levelnull](https://foil.zone/u/Levelnull)
#### Post date: [June 6, 2018, 10:18am UTC](https://foil.zone/t/northern-germany-build/1888/1 "2018-06-06T10:18:47Z")

</div>

Hi,

I finally start building my own efoil.  
Basically try to be as close to pacificmeister’s build as possible to prevent some unnecessary beginner mistakes to get hopefully started in a month 🙂  
Components:  
2x 6s 10000 mAh battery from Hobbyking (will switch to 18650 after the initial testing I think)  
sss 56104 500 kV (maybe 56114 360 kV)  
Neugart 5:1 (maybe 4:1) still need to have the flange modified by Neugart  
YEP HV 180A Marine

Does anyone else use the YEP controller yet?

 ![20180605_171227](https://efoil.builders/uploads/default/original/2X/c/c4e87c506110dda572fb9592d760fec50ce60df4.jpg)

---

<div class="post-metadata">

### Author: ![Jezza](https://foil.zone/letter_avatar_proxy/v4/letter/j/dfb087/32.png) [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [June 6, 2018, 10:55am UTC](https://foil.zone/t/northern-germany-build/1888/2 "2018-06-06T10:55:34Z")

</div>

I have used the YEP120A with modified heatsink. I know of 2 others on here using the YEP120A as well. It all comes down to good soldering connections, water-cooling (maybe adding a better heatsink) and keeping the ESC as close to the batteries as possible.