# okpTow - Jatem's style

**URL:** https://foil.zone/t/okptow-jatems-style/17205
**Category:** Builds
**Created:** [December 19, 2022, 8:47pm UTC](https://foil.zone/t/okptow-jatems-style/17205 "2022-12-19T20:47:24Z")
**Posts on this page:** 1
**Showing post:** 41

<div class="post-metadata">

### Author: ![Foilguy](https://foil.zone/letter_avatar_proxy/v4/letter/f/7cd45c/32.png) [@Foilguy](https://foil.zone/u/Foilguy)
#### Post date: [March 2, 2023, 9:55pm UTC](https://foil.zone/t/okptow-jatems-style/17205/41 "2023-03-02T21:55:58Z")

</div>

@okp

Thanks for showing the 75200 upgraded fittings. I just started a thread on this issue.

> [@Flipsky 75200 water cooling](https://foil.zone/t/flipsky-75200-water-cooling/17661/3):
>
> I am going to use these little adapters I made 3d printed.

Check the 3D print fittings from @windego. The return would take less room than the bent tube version

Can you provide source / info for the fittings and the tubing you are now using.

---

_[View the full topic](https://foil.zone/t/okptow-jatems-style/17205)._