# Project & Part recomendations

**URL:** https://foil.zone/t/project-part-recomendations/11233
**Category:** Builds
**Created:** [December 15, 2020, 11:54pm UTC](https://foil.zone/t/project-part-recomendations/11233 "2020-12-15T23:54:45Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![HenryF](https://foil.zone/letter_avatar_proxy/v4/letter/h/5f8ce5/32.png) [@HenryF](https://foil.zone/u/HenryF)
#### Post date: [December 15, 2020, 11:54pm UTC](https://foil.zone/t/project-part-recomendations/11233/1 "2020-12-15T23:54:45Z")

</div>

Hi there! I was wondering what it would take to construct a very reliable board that I could put a lot of hours on, What parts would you recommend? What would you estimate the cost to be? In addition, I don’t have a whole lot of experience with building things about the biggest thing I have built is a 3d printer what are some projects that are relatively inexpensive that you would recommend so that I can learn the skills needed to make an efoil.

---

<div class="post-metadata">

### Author: ![foilmore](https://foil.zone/user_avatar/foil.zone/foilmore/32/15683_2.png) [@foilmore](https://foil.zone/u/foilmore)
#### Post date: [December 16, 2020, 12:31am UTC](https://foil.zone/t/project-part-recomendations/11233/2 "2020-12-16T00:31:24Z")

</div>

Start with an ebike and/or esk8 board to learn some ebuilding skills. Much cheaper, easier, and parts are more available. Also, get a foil and cheap board with foilmount and start learning how to ride it behind boats. That way you will already know how to ride an efoil before finishing it and if you even like foiling. It isn’t for everyone. I have introduced no less than 12 of my friends who are watersports enthusiasts to foiling and none have continued the pursuit to learn.

The reliability will come down to not just the parts used, but also a blend of your build skills and how well you can ride it without abusing it.

---

<div class="post-metadata">

### Author: ![HenryF](https://foil.zone/letter_avatar_proxy/v4/letter/h/5f8ce5/32.png) [@HenryF](https://foil.zone/u/HenryF)
#### Post date: [December 16, 2020, 4:15pm UTC](https://foil.zone/t/project-part-recomendations/11233/3 "2020-12-16T16:15:11Z")

</div>

thanks thats a really good idea!
