# Propeller fixing to motor

**URL:** https://foil.zone/t/propeller-fixing-to-motor/27261
**Category:** Propulsion System (Motor, Gears)
**Created:** [October 5, 2026, 2:06pm UTC](https://foil.zone/t/propeller-fixing-to-motor/27261 "2026-10-05T14:06:18Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![laser3322](https://foil.zone/letter_avatar_proxy/v4/letter/l/71e660/32.png) [@laser3322](https://foil.zone/u/laser3322)
#### Post date: [October 5, 2026, 2:06pm UTC](https://foil.zone/t/propeller-fixing-to-motor/27261/1 "2026-10-05T14:06:18Z")

</div>

I lost a prop this weekend for for my dual motor tow boogie. Turns out one motor was still just enough to get my son up foiling, as long as he didn’t mind going in circles!

I thought the machine screws were in pretty tight, and it was probably only 3hrs usage since I last tightened them. I am using Flipsky 6384 with K-parts 3 bladed props. I was thinking of using loctite to fix the machine screws into the motor, but I believe that could destroy the 3D printed prop. What do others use?

---

<div class="post-metadata">

### Author: ![ludwig\_bre](https://foil.zone/user_avatar/foil.zone/ludwig_bre/32/24870_2.png) [@ludwig\_bre](https://foil.zone/u/ludwig_bre)
#### Post date: [October 5, 2026, 3:29pm UTC](https://foil.zone/t/propeller-fixing-to-motor/27261/2 "2026-10-05T15:29:18Z")

</div>

> [@laser3322](#):
>
> I was thinking of using loctite to fix the machine screws into the motor, but I believe that could destroy the 3D printed prop. What do others use?

loctite, just put it on the screw, not the prop 😃