# Propeller measurements
**URL:** https://foil.zone/t/propeller-measurements/15644
**Category:** Props & Ducts
**Created:** [May 3, 2022, 6:05pm UTC](https://foil.zone/t/propeller-measurements/15644 "2022-05-03T18:05:58Z")
**Posts on this page:** 16
**Page:** 1
### Author:  [@JetboardCologne](https://foil.zone/u/JetboardCologne)
#### Post date: [May 3, 2022, 6:05pm UTC](https://foil.zone/t/propeller-measurements/15644/1 "2022-05-03T18:05:58Z")
Best regard Frank
---
### Author:  [@JetboardCologne](https://foil.zone/u/JetboardCologne)
#### Post date: [May 3, 2022, 6:09pm UTC](https://foil.zone/t/propeller-measurements/15644/2 "2022-05-03T18:09:13Z")
Katamaran used for measur
24kg all incl. Ready for ride
---
### Author:  [@Cid156](https://foil.zone/u/Cid156)
#### Post date: [May 3, 2022, 6:50pm UTC](https://foil.zone/t/propeller-measurements/15644/3 "2022-05-03T18:50:35Z")
Are you using a cheap 6384 120kv in 6s?
The two blade prop are 3d printed?
---
### Author:  [@cim96dm7](https://foil.zone/u/cim96dm7)
#### Post date: [May 3, 2022, 8:08pm UTC](https://foil.zone/t/propeller-measurements/15644/4 "2022-05-03T20:08:06Z")
Sorry but without having nephogram of motor or knowing characteristics of vessel, this does not say much. You are probably hitting a wall of deplacement speed at 13kmh. Examples with same speed and pitch/rpm are good comparison of which principle is best.
---
### Author:  [@JetboardCologne](https://foil.zone/u/JetboardCologne)
#### Post date: [May 3, 2022, 8:30pm UTC](https://foil.zone/t/propeller-measurements/15644/5 "2022-05-03T20:30:35Z")
Yes, is a Prop von EML in very good quality
6384, 150A flycolor hv and 6s Lipo
---
### Author:  [@JetboardCologne](https://foil.zone/u/JetboardCologne)
#### Post date: [May 3, 2022, 8:37pm UTC](https://foil.zone/t/propeller-measurements/15644/6 "2022-05-03T20:37:31Z")
No wall 😊
By 12s runs this Kat 25km/h
In addition, the conditions are the same for all props.
---
### Author:  [@Cid156](https://foil.zone/u/Cid156)
#### Post date: [May 4, 2022, 7:26pm UTC](https://foil.zone/t/propeller-measurements/15644/7 "2022-05-04T19:26:27Z")
I have few to try too 😃
Are you using the same cheap motor?
---
### Author:  [@JetboardCologne](https://foil.zone/u/JetboardCologne)
#### Post date: [May 5, 2022, 3:01am UTC](https://foil.zone/t/propeller-measurements/15644/8 "2022-05-05T03:01:46Z")
Yes, I used 6384, 120kv. It’s a nice and good motor.
Best regards Frank
---
### Author:  [@yargaroo](https://foil.zone/u/yargaroo)
#### Post date: [May 5, 2022, 5:56am UTC](https://foil.zone/t/propeller-measurements/15644/9 "2022-05-05T05:56:34Z")
Where do you get this 3BL CNC Alu Prop turning Clockwise?
---
### Author:  [@sniper](https://foil.zone/u/sniper)
#### Post date: [May 5, 2022, 10:40am UTC](https://foil.zone/t/propeller-measurements/15644/10 "2022-05-05T10:40:50Z")
It’s one year of testing for me too need to record log in riding i need a wavrx🤙
(If anyone have an wavrx don’t used😁)
---
### Author:  [@JetboardCologne](https://foil.zone/u/JetboardCologne)
#### Post date: [May 5, 2022, 2:42pm UTC](https://foil.zone/t/propeller-measurements/15644/11 "2022-05-05T14:42:28Z")
Sorry, it’s not to buy, it’s a work from a friend.
Beste regards
---
### Author:  [@Cid156](https://foil.zone/u/Cid156)
#### Post date: [May 5, 2022, 5:52pm UTC](https://foil.zone/t/propeller-measurements/15644/12 "2022-05-05T17:52:49Z")
On which motor?
Just in case I put some epoxy on it and them in vaccum bag. The prop becomes much more rigid.
---
### Author:  [@freddyforlaunch](https://foil.zone/u/freddyforlaunch)
#### Post date: [May 6, 2022, 7:46am UTC](https://foil.zone/t/propeller-measurements/15644/13 "2022-05-06T07:46:42Z")
Nice insights! For as far as I know it is also beneficial for the analysis to log the rotational speed in rpm.
---
### Author:  [@Cid156](https://foil.zone/u/Cid156)
#### Post date: [May 8, 2022, 9:45am UTC](https://foil.zone/t/propeller-measurements/15644/14 "2022-05-08T09:45:24Z")
Where do you find these props?
---
### Author:  [@JetboardCologne](https://foil.zone/u/JetboardCologne)
#### Post date: [May 8, 2022, 12:02pm UTC](https://foil.zone/t/propeller-measurements/15644/15 "2022-05-08T12:02:46Z")
You can buy it 😳😊🙃
By Easyfoil, Flite, FR…
---
### Author:  [@Larsb](https://foil.zone/u/Larsb)
#### Post date: [January 10, 2023, 12:14pm UTC](https://foil.zone/t/propeller-measurements/15644/16 "2023-01-10T12:14:16Z")
Nice to see some figures in comparable conditions, can’t help but wonder though how much the 13-15kph span affects the drag.