# Propellers and Ducts **URL:** https://foil.zone/t/propellers-and-ducts/38 **Category:** Props & Ducts **Created:** [October 16, 2017, 7:23pm UTC](https://foil.zone/t/propellers-and-ducts/38 "2017-10-16T19:23:06Z") **Posts on this page:** 4 **Page:** 16
### Author: ![Ben](https://foil.zone/letter_avatar_proxy/v4/letter/b/df788c/32.png) [@Ben](https://foil.zone/u/Ben) #### Post date: [February 7, 2021, 12:30am UTC](https://foil.zone/t/propellers-and-ducts/38/312 "2021-02-07T00:30:51Z")
This seems to be quite similar to the Voith Linear Jet, a recent development in high speed propulsion for larger ships ![Screenshot 2021-02-07 at 01.20.21](https://foil.zone/uploads/default/original/3X/f/8/f8f3acd4f8314c920f13f9e801dfe67c710bd3bc.jpeg) ---
### Author: ![testandoxeon](https://foil.zone/letter_avatar_proxy/v4/letter/t/67e7ee/32.png) [@testandoxeon](https://foil.zone/u/testandoxeon) #### Post date: [November 8, 2023, 1:06pm UTC](https://foil.zone/t/propellers-and-ducts/38/313 "2023-11-08T13:06:05Z")
Hi everybody. this prop is reasonable? [https://grabcad.com/library/propeller134-5x211-6mm-1](https://grabcad.com/library/propeller134-5x211-6mm-1) ---
### Author: ![qdbluemind](https://foil.zone/letter_avatar_proxy/v4/letter/q/dbc845/32.png) [@qdbluemind](https://foil.zone/u/qdbluemind) #### Post date: [May 22, 2024, 4:34pm UTC](https://foil.zone/t/propellers-and-ducts/38/314 "2024-05-22T16:34:38Z")
I want to build a hydrofoil boat, want to redesign propeller by using your CAD via onshape. [oceangis@gmail.com](mailto:oceangis@gmail.com) Cheers! ---
### Author: ![I\_will\_be\_propeller](https://foil.zone/letter_avatar_proxy/v4/letter/i/b9bd4f/32.png) [@I\_will\_be\_propeller](https://foil.zone/u/I_will_be_propeller) #### Post date: [May 29, 2024, 6:48am UTC](https://foil.zone/t/propellers-and-ducts/38/315 "2024-05-29T06:48:13Z")
Is there anyone have an issue about saving the propeller geometry as .IGES file? I am trying to save as .IGES but a 2kb file is produced and CATIA v5 and SOLIDWORKS 2020 could not read it. I would be grateful if anyone can help. [Previous page](https://foil.zone/t/propellers-and-ducts/38.md?page=15)