# Questions about Oli's Foil Assist Build

**URL:** https://foil.zone/t/questions-about-olis-foil-assist-build/22822
**Category:** Builds
**Created:** [January 30, 2025, 5:22am UTC](https://foil.zone/t/questions-about-olis-foil-assist-build/22822 "2025-01-30T05:22:49Z")
**Posts on this page:** 1
**Showing post:** 3

<div class="post-metadata">

### Author: ![S\_Roger](https://foil.zone/letter_avatar_proxy/v4/letter/s/9de053/32.png) [@S\_Roger](https://foil.zone/u/S_Roger)
#### Post date: [January 30, 2025, 2:04pm UTC](https://foil.zone/t/questions-about-olis-foil-assist-build/22822/3 "2025-01-30T14:04:45Z")

</div>

That’s a nice custom board, I imagine the most optimized way to do an assist if you have the time/space/skill set. This reminds me a bit of the assist build by @hangloose. He managed to [bore a hole through his board](https://foil.zone/t/2-build-from-south-germany-prone-board-saite-63100-12s7p-molicel-p42a/19959/70) to connect the phase wires

---

_[View the full topic](https://foil.zone/t/questions-about-olis-foil-assist-build/22822)._