# Selling Mast Motor ESC Combination

**URL:** https://foil.zone/t/selling-mast-motor-esc-combination/21838
**Category:** Buy & Sell
**Created:** [September 18, 2024, 1:27pm UTC](https://foil.zone/t/selling-mast-motor-esc-combination/21838 "2024-09-18T13:27:22Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![thorlex](https://foil.zone/letter_avatar_proxy/v4/letter/t/e56c9b/32.png) [@thorlex](https://foil.zone/u/thorlex)
#### Post date: [September 18, 2024, 1:27pm UTC](https://foil.zone/t/selling-mast-motor-esc-combination/21838/1 "2024-09-18T13:27:22Z")

</div>

Hello everyone,

I am selling my exchange/second mast.

Installed is a 65161/65162 motor, with an Easyfoil VESC and a Metr/Voyage GPS module. On a RL mast with Mastplate. The ESC is waterproof molded and fitted with an XT90 connector.

Compatible with the VX3.

500€ without radio without propeller

600€ with Easyfoil/VX3 remote control

700€ with Easyfoil/VX3 remote control and 7 inch propeller

Regards

 ![47886AFD-D81F-47DA-8845-66EA83E68472_1_105_c](https://foil.zone/uploads/default/original/3X/1/3/135932877af8d6e5e63b132d29f9cfcdf8757386.jpeg)  
 ![21BA47CC-1624-41E6-8111-04ACDFC8F310_1_105_c](https://foil.zone/uploads/default/original/3X/f/f/ff829d051da2d246499964528cb1695c0b7d505f.jpeg)  
 ![3BD05B26-AD9C-4424-982B-55BF3E032927_1_105_c](https://foil.zone/uploads/default/original/3X/d/6/d62f8e069b688870a5ce89a4508244528aa220c1.jpeg)  
 ![58F95BDF-97B3-47A1-AD3E-EF0461C29339_1_105_c](https://foil.zone/uploads/default/original/3X/2/9/29985bd3b4132a225d1f42f108b32ce7e83d4688.jpeg)

---

<div class="post-metadata">

### Author: ![atilla](https://foil.zone/letter_avatar_proxy/v4/letter/a/b5a626/32.png) [@atilla](https://foil.zone/u/atilla)
#### Post date: [September 23, 2024, 1:10pm UTC](https://foil.zone/t/selling-mast-motor-esc-combination/21838/2 "2024-09-23T13:10:32Z")

</div>

hey, what’s the acceptable voltage range for this ESC?  
mast size and compatible foils can be attached?  
Does remote signal pass well without external antenna?

---

<div class="post-metadata">

### Author: ![thorlex](https://foil.zone/letter_avatar_proxy/v4/letter/t/e56c9b/32.png) [@thorlex](https://foil.zone/u/thorlex)
#### Post date: [September 23, 2024, 2:42pm UTC](https://foil.zone/t/selling-mast-motor-esc-combination/21838/3 "2024-09-23T14:42:49Z")

</div>

Hi,

BWESC V4 Platine: 140 x 45 x 16mm  
Eingangsspannung: bis 67 Volt (16S)

Thats the information from easyfoil

Mast length is 75cm and fits to rl wing system

Remote signal working great, there is a external antenna in the esc hosuing

Mastplate screw pattern is 165x90mm

---

<div class="post-metadata">

### Author: ![ericj](https://foil.zone/letter_avatar_proxy/v4/letter/e/22d042/32.png) [@ericj](https://foil.zone/u/ericj)
#### Post date: [October 15, 2024, 3:57pm UTC](https://foil.zone/t/selling-mast-motor-esc-combination/21838/4 "2024-10-15T15:57:46Z")

</div>

Hey… Do you still have the articles?

If yes, I have a few questions:  
-I have a takuma with broken mast/motor and would like to put the VESC inside the board. Does it need cooling? Can the VESC be separated from the mast?

- what is the distance of the holes on the mast plate?

Thanks,

Eric

---

<div class="post-metadata">

### Author: ![thorlex](https://foil.zone/letter_avatar_proxy/v4/letter/t/e56c9b/32.png) [@thorlex](https://foil.zone/u/thorlex)
#### Post date: [October 17, 2024, 7:20pm UTC](https://foil.zone/t/selling-mast-motor-esc-combination/21838/5 "2024-10-17T19:20:23Z")

</div>

Hi Eric

yes, still have it

the hole pattern is 90x165mm

you cant separated the vesc from the mast.

I think the vesc is cooled pasive via the aluminium

regards