# Setting problem flipsky / vesc tool **URL:** https://foil.zone/t/setting-problem-flipsky-vesc-tool/25345 **Category:** Build, Repair & Mod **Tags:** remote-control **Created:** [November 11, 2025, 10:38am UTC](https://foil.zone/t/setting-problem-flipsky-vesc-tool/25345 "2025-11-11T10:38:38Z") **Posts on this page:** 1 **Showing post:** 8
### Author: ![janefoil](https://foil.zone/letter_avatar_proxy/v4/letter/j/f475e1/32.png) [@janefoil](https://foil.zone/u/janefoil) #### Post date: [November 15, 2025, 5:20pm UTC](https://foil.zone/t/setting-problem-flipsky-vesc-tool/25345/8 "2025-11-15T17:20:09Z")
yeeeee works properly atlast but was not the most easy job pfff lots of try and errors, almost given up… so previous info was wrong, i used the wrong cable need to use cable thats fit exact ( esc port 6 + reciever) no free pins at vesctool (setup input) use the “wireles niku kama nunchuk” remote ![remote choise vesc tool](https://foil.zone/uploads/default/original/3X/9/4/94f0acacceaa095901d09974e67d81a1ef0ef5fe.png) and then al go’s well (ludwig bre needs to make a new version of the setting on you tube 😉) o boy so happy 🤗🤗😁😁👌🕶🕶 (hope in the water all go’s well to) next step assemby, adjustemnt, 3d printing for cone … step by step ![VX5 working](https://foil.zone/uploads/default/original/3X/6/6/664ac273f94208caceb223c40741eb63d19ebfb2.jpeg) --- _[View the full topic](https://foil.zone/t/setting-problem-flipsky-vesc-tool/25345)._