# Settings BLHeli for Flycolor HV3 160A Flipsky 6384
**URL:** https://foil.zone/t/settings-blheli-for-flycolor-hv3-160a-flipsky-6384/23551
**Category:** Build, Repair & Mod
**Created:** [May 6, 2025, 3:14pm UTC](https://foil.zone/t/settings-blheli-for-flycolor-hv3-160a-flipsky-6384/23551 "2025-05-06T15:14:16Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@surfisio](https://foil.zone/u/surfisio)
#### Post date: [May 6, 2025, 3:14pm UTC](https://foil.zone/t/settings-blheli-for-flycolor-hv3-160a-flipsky-6384/23551/1 "2025-05-06T15:14:16Z")
Hi,
I’m building my own foil assist. I have two 6S2P batteries in series, a Flipsky 6384 motor, and a Flycolor 160A ESC.
I’ve looked at almost all the forum posts, and I’m wondering how to set the current protection. Some recommend 50A because it should be 160/3, or 53A max. Others use 90A, 150A, or disable the protection completely. I’m a bit lost about it … Connectors we are using mostling are MR60 or connectors that manage only 50A.
What about Non damped mode ?
What are you settings mainly ?
Thank you for your help !
---
### Author:  [@lishine](https://foil.zone/u/lishine)
#### Post date: [May 6, 2025, 7:20pm UTC](https://foil.zone/t/settings-blheli-for-flycolor-hv3-160a-flipsky-6384/23551/2 "2025-05-06T19:20:07Z")
There is already topic for this
'[ESC Flycolor X Cross HV3 settings on BlHeli 32](https://foil.zone/t/esc-flycolor-x-cross-hv3-settings-on-blheli-32/19725)
---
### Author:  [@surfisio](https://foil.zone/u/surfisio)
#### Post date: [May 6, 2025, 8:00pm UTC](https://foil.zone/t/settings-blheli-for-flycolor-hv3-160a-flipsky-6384/23551/3 "2025-05-06T20:00:40Z")
Hi yes I read it several times but don’t understand which conclusions to take 😂
---
### Author:  [@lishine](https://foil.zone/u/lishine)
#### Post date: [May 6, 2025, 8:35pm UTC](https://foil.zone/t/settings-blheli-for-flycolor-hv3-160a-flipsky-6384/23551/4 "2025-05-06T20:35:16Z")
Sure, I understand, but no need to create another topic.