# Slingshot hover-glide mast design
**URL:** https://foil.zone/t/slingshot-hover-glide-mast-design/1543
**Category:** Foils & Boards
**Created:** [April 8, 2018, 4:50pm UTC](https://foil.zone/t/slingshot-hover-glide-mast-design/1543 "2018-04-08T16:50:34Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@Taekni](https://foil.zone/u/Taekni)
#### Post date: [April 8, 2018, 4:50pm UTC](https://foil.zone/t/slingshot-hover-glide-mast-design/1543/1 "2018-04-08T16:50:34Z")
Does any one have a slingshot hover glide mast and could make a design drawing of its cross section. I can’t find a scale drawing and need one for the plans of my foil build and I’m not going to get the mast for a while so I can’t make one myself.
---
### Author:  [@pacificmeister](https://foil.zone/u/pacificmeister)
#### Post date: [April 9, 2018, 6:34am UTC](https://foil.zone/t/slingshot-hover-glide-mast-design/1543/2 "2018-04-09T06:34:59Z")
I made one for that foil last year, totally forgot about it. Never used it. It’s quite a heavy mast profile. But stable. Here the mount ([Fusion web link](https://a360.co/2GGnsjY)):
https://myhub.autodesk360.com/ue29ca300/shares/public/SHabee1QT1a327cf2b7a4d3bad943d660534?mode=embed Hope this helps.
---
### Author:  [@Taekni](https://foil.zone/u/Taekni)
#### Post date: [April 9, 2018, 5:01pm UTC](https://foil.zone/t/slingshot-hover-glide-mast-design/1543/3 "2018-04-09T17:01:08Z")
Cheers for the CAD design file @pacificmeister ,but I probably should have been more clear I meant a PDF or such like design drawing that I could print out on paper and use as a drilling template.Unfortunately I don’t have a 3d printer so I’m working on a relatively low tech build.
---
### Author:  [@pacificmeister](https://foil.zone/u/pacificmeister)
#### Post date: [April 9, 2018, 9:51pm UTC](https://foil.zone/t/slingshot-hover-glide-mast-design/1543/4 "2018-04-09T21:51:27Z")
@Taekni, no problem we can derive it from the Fusion file. I [exported it as PDF](https://a360.co/2qja36A) for you on A4. I could not verify the measurement since I don’t have the mast here, hope I got that right when I did it. Good luck.
---
### Author:  [@2D-Foiler](https://foil.zone/u/2D-Foiler)
#### Post date: [April 11, 2018, 3:13pm UTC](https://foil.zone/t/slingshot-hover-glide-mast-design/1543/5 "2018-04-11T15:13:18Z")
Hi, I have the mast here. For a crosscheck: 114,4 x 15,3 mm.
---
### Author:  [@jakebarnhill1](https://foil.zone/u/jakebarnhill1)
#### Post date: [February 13, 2019, 10:47am UTC](https://foil.zone/t/slingshot-hover-glide-mast-design/1543/6 "2019-02-13T10:47:32Z")
Hey all, can anyone here confirm @pacificmeisters file: [Fusion](https://a360.co/2GGnsjY) posted above for the slingshot mast is the same profile as the 2019 slingshot masts used in the Surf Foil such as this:
[https://slingshotaustralia.com.au/collections/surf-foils/products/2019-slingshot-hover-glide-fsurf-foil](https://slingshotaustralia.com.au/collections/surf-foils/products/2019-slingshot-hover-glide-fsurf-foil)
I want to start making the mast clamp before I get the foil, if someone could confirm it is the same as the mast profile above that would be greatly appreciated!
---
### Author:  [@Jarrett](https://foil.zone/u/Jarrett)
#### Post date: [April 22, 2020, 2:26pm UTC](https://foil.zone/t/slingshot-hover-glide-mast-design/1543/7 "2020-04-22T14:26:36Z")
@jakebarnhill1, did you ever get an answer about the hoverlglide mast? Also, the link to the file for the mount is broken - can anybody share it again?