# SLS printed MHz jet connect

**URL:** https://foil.zone/t/sls-printed-mhz-jet-connect/2711
**Category:** Builds
**Created:** [August 27, 2018, 2:39pm UTC](https://foil.zone/t/sls-printed-mhz-jet-connect/2711 "2018-08-27T14:39:36Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Kappertz](https://foil.zone/user_avatar/foil.zone/kappertz/32/42261_2.png) [@Kappertz](https://foil.zone/u/Kappertz)
#### Post date: [August 27, 2018, 2:39pm UTC](https://foil.zone/t/sls-printed-mhz-jet-connect/2711/1 "2018-08-27T14:39:36Z")

</div>

Got my SLS waterproof plastic MHz jet connector back. Now waiting for the shaft so I can run some thrust tests.

 ![image](https://efoil.builders/uploads/default/original/2X/6/65183a53963ef553172bebc8e3f45679836287bc.jpeg)

---

<div class="post-metadata">

### Author: ![Jezza](https://foil.zone/letter_avatar_proxy/v4/letter/j/dfb087/32.png) [@Jezza](https://foil.zone/u/Jezza)
#### Post date: [August 27, 2018, 4:09pm UTC](https://foil.zone/t/sls-printed-mhz-jet-connect/2711/2 "2018-08-27T16:09:15Z")

</div>

That looks very nice and neat! I hope the tests work well!