# SSS56104 motor bearing replacement
**URL:** https://foil.zone/t/sss56104-motor-bearing-replacement/9093
**Category:** Propulsion System (Motor, Gears)
**Created:** [August 13, 2020, 9:39am UTC](https://foil.zone/t/sss56104-motor-bearing-replacement/9093 "2020-08-13T09:39:49Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@rogjalon](https://foil.zone/u/rogjalon)
#### Post date: [August 13, 2020, 9:39am UTC](https://foil.zone/t/sss56104-motor-bearing-replacement/9093/1 "2020-08-13T09:39:49Z")
Has anyone changed the bearings on a SSS56104 motor. I would like to know the bearing sizes, so that I can order the bearings before disasembly.
Any tips or hints for dismantling and reassembly would be appreciated too.
---
### Author:  [@Alexandre](https://foil.zone/u/Alexandre)
#### Post date: [August 13, 2020, 10:30am UTC](https://foil.zone/t/sss56104-motor-bearing-replacement/9093/2 "2020-08-13T10:30:32Z")
I don’t think anyone has done this before , did my
Tp every 20h , just cleaning ( running wet) , nothing special for taking a part , just be careful for the order of the washers and on no mine rust started to size bearing on the shaft
May be not necessary to change the bearing on the first time , just a deep clean and measure the bearings size , sss motor normally are made by TFL but there a lot around there
Check tfl website before , I will look for the link …
---
### Author:  [@Alexandre](https://foil.zone/u/Alexandre)
#### Post date: [August 13, 2020, 10:39am UTC](https://foil.zone/t/sss56104-motor-bearing-replacement/9093/3 "2020-08-13T10:39:57Z")
Here :
Not sure about universal mount …
> **[Ersatzteile](https://www.tfl-hobby.de/Motore--Halter--usw-/Brushless/ersatzteile/)**
---
### Author:  [@sniper](https://foil.zone/u/sniper)
#### Post date: [August 13, 2020, 10:45am UTC](https://foil.zone/t/sss56104-motor-bearing-replacement/9093/5 "2020-08-13T10:45:37Z")
I use 608 zz ceramique like skateboard…but thé kit in yours post use 3 bearing?
---
### Author:  [@Alexandre](https://foil.zone/u/Alexandre)
#### Post date: [August 13, 2020, 10:46am UTC](https://foil.zone/t/sss56104-motor-bearing-replacement/9093/6 "2020-08-13T10:46:36Z")
3 sizes , 40 , 56mm 8-10mm shaft I guess
So 22mm ext and 7mm deep on 56mm motor ?
---
### Author:  [@sniper](https://foil.zone/u/sniper)
#### Post date: [August 13, 2020, 1:00pm UTC](https://foil.zone/t/sss56104-motor-bearing-replacement/9093/7 "2020-08-13T13:00:40Z")
because juste 2 bearing in the sss 56104 500kv i think tp 40 is not the same bearing size…but yes it’s 8 /22/7 size
---
### Author:  [@Marc87](https://foil.zone/u/Marc87)
#### Post date: [August 13, 2020, 2:29pm UTC](https://foil.zone/t/sss56104-motor-bearing-replacement/9093/8 "2020-08-13T14:29:42Z")
I changed them a few weeks ago. I got these for my SSS 56104 360kv:
Deep Groove Ball Bearing 61900 ZZ C3 10x22x6 mm
(I measured mine before ordering)
The disassembly went smooth. Just be careful with the tiny screws holding the cap. Assembly was okay, magnets are powerful, offsetting it slightly when trying to get the cap on. But with some wiggling it worked.
---
### Author:  [@rogjalon](https://foil.zone/u/rogjalon)
#### Post date: [August 13, 2020, 8:54pm UTC](https://foil.zone/t/sss56104-motor-bearing-replacement/9093/9 "2020-08-13T20:54:50Z")
@Alexandre @sniper @Marc87
Thankyou for your assistance. Your efforts are appreciated.