# \[Surf n' Destroy\] Building a flying sniper rifle case

**URL:** https://foil.zone/t/surf-n-destroy-building-a-flying-sniper-rifle-case/11555
**Category:** Foils & Boards
**Tags:** vesc
**Created:** [January 14, 2021, 12:11am UTC](https://foil.zone/t/surf-n-destroy-building-a-flying-sniper-rifle-case/11555 "2021-01-14T00:11:56Z")
**Posts on this page:** 1
**Showing post:** 185

<div class="post-metadata">

### Author: ![windego](https://foil.zone/letter_avatar_proxy/v4/letter/w/ecccb3/32.png) [@windego](https://foil.zone/u/windego)
#### Post date: [July 17, 2023, 1:29pm UTC](https://foil.zone/t/surf-n-destroy-building-a-flying-sniper-rifle-case/11555/185 "2023-07-17T13:29:55Z")

</div>

> [@Fliteboard prop for Flipsky 65161](https://foil.zone/t/fliteboard-prop-for-flipsky-65161/18585/4):
>
> I found this excellent drawing by @superlefax on one of the other threads and I had three questions Can someone confirm that both the 8.1 and the 10.95 shaft pathways should be reamed out to 12mm? If so could I successfully use a hand reamer set to incrementally enlarge the hole as I don’t own a lathe or drill press. I believe the original Flipsky shaft pin is smaller than the receptacle slot in the “base” of the Flite prop. Can anyone suggest a way to use the original pin or …

There are dimensions in this thread. All you need is to ream the 10.95 part to 12 and it fits and works great.

 ![20230716_093233](https://foil.zone/uploads/default/original/3X/e/5/e5408e8f5c30fc104718b0ecc45cf7be138887d3.jpeg)

---

_[View the full topic](https://foil.zone/t/surf-n-destroy-building-a-flying-sniper-rifle-case/11555)._