# \[Surf n' Destroy\] Building a flying sniper rifle case

**URL:** https://foil.zone/t/surf-n-destroy-building-a-flying-sniper-rifle-case/11555
**Category:** Foils & Boards
**Tags:** vesc
**Created:** [January 14, 2021, 12:11am UTC](https://foil.zone/t/surf-n-destroy-building-a-flying-sniper-rifle-case/11555 "2021-01-14T00:11:56Z")
**Posts on this page:** 1
**Showing post:** 32

<div class="post-metadata">

### Author: ![kotnascher](https://foil.zone/user_avatar/foil.zone/kotnascher/32/13335_2.png) [@kotnascher](https://foil.zone/u/kotnascher)
#### Post date: [January 28, 2021, 11:11am UTC](https://foil.zone/t/surf-n-destroy-building-a-flying-sniper-rifle-case/11555/32 "2021-01-28T11:11:33Z")

</div>

Hey guys,  
our “Weapon of mass consumption” is entering the hot phase. A passive cooled HGLtech Hi 75/200 Vesc, mounted in a waterproof aluminium box will do the scutwork. It comes with 10AWG motorcables and 3 x XT60 plugs battery-sided. I cutted those (yay! free plugs) and soldered the 3 x 12AWG to a 8AWG cable. I also cutted the RJ45-plugs from an old networkcable and used it to extend the PPM+UART port of the Vesc to a second waterproof plasicbox which will be placed in the upper front of rifle case.

 ![photo_2021-01-28_10-51-54](https://foil.zone/uploads/default/original/3X/e/6/e6f2072745ae950818b4f1365a9e76b7ae38e8d6.jpeg)

Metr-modul for wireless configuration+logging and Maytec Rx for PPM input

 ![photo_2021-01-28_10-52-24](https://foil.zone/uploads/default/original/3X/b/8/b88a394fc87ba2eb8b2a229b40c3b3fb1a45f7a5.jpeg)

the electronics-box mounted on the stiffener-plate directly in front of the rivet nuts

 ![photo_2021-01-28_10-52-30](https://foil.zone/uploads/default/original/3X/1/0/109d30725e38c8b9f4cabbd171032971a40324c9.jpeg)

---

_[View the full topic](https://foil.zone/t/surf-n-destroy-building-a-flying-sniper-rifle-case/11555)._