# Swabian Efoil build

**URL:** https://foil.zone/t/swabian-efoil-build/14556
**Category:** Builds
**Created:** [November 20, 2021, 12:31pm UTC](https://foil.zone/t/swabian-efoil-build/14556 "2021-11-20T12:31:19Z")
**Posts on this page:** 19
**Page:** 3

<div class="post-metadata">

### Author: ![ArminHarich](https://foil.zone/user_avatar/foil.zone/arminharich/32/23830_2.png) [@ArminHarich](https://foil.zone/u/ArminHarich)
#### Post date: [June 20, 2022, 7:19am UTC](https://foil.zone/t/swabian-efoil-build/14556/43 "2022-06-20T07:19:31Z")

</div>

Thank you.

Yes, the the blades design is super important!

---

<div class="post-metadata">

### Author: ![ArminHarich](https://foil.zone/user_avatar/foil.zone/arminharich/32/23830_2.png) [@ArminHarich](https://foil.zone/u/ArminHarich)
#### Post date: [June 20, 2022, 7:33am UTC](https://foil.zone/t/swabian-efoil-build/14556/44 "2022-06-20T07:33:35Z")

</div>

That is also a very hydrodynamic design, just without folding prop.

 ![c-pod-candela-header.jpg](https://foil.zone/uploads/default/original/3X/b/2/b2e946a6d821efb78695f038b23aa29f4046c039.webp)

---

<div class="post-metadata">

### Author: ![leachim](https://foil.zone/letter_avatar_proxy/v4/letter/l/43a26b/32.png) [@leachim](https://foil.zone/u/leachim)
#### Post date: [June 20, 2022, 9:02am UTC](https://foil.zone/t/swabian-efoil-build/14556/45 "2022-06-20T09:02:45Z")

</div>

Jeah, there would be so much nice solutions. But my main goal is to keep it as simple and reusable as possible. With my current setup i just need to exchange the Mast and have a full Kitefoil/Wakefoil/Surffoil equipment. I already have too much equipment and it tends to get more 😅.

---

<div class="post-metadata">

### Author: ![pablo\_foil](https://foil.zone/letter_avatar_proxy/v4/letter/p/5fc32e/32.png) [@pablo\_foil](https://foil.zone/u/pablo_foil)
#### Post date: [June 20, 2022, 9:12am UTC](https://foil.zone/t/swabian-efoil-build/14556/46 "2022-06-20T09:12:42Z")

</div>

Also, in a foildrive the pod is meant to be out of the water once it’s finished its job, so having an inneficient profile is not important as long as your power is enough to start flying…

---

<div class="post-metadata">

### Author: ![ArminHarich](https://foil.zone/user_avatar/foil.zone/arminharich/32/23830_2.png) [@ArminHarich](https://foil.zone/u/ArminHarich)
#### Post date: [June 20, 2022, 10:05am UTC](https://foil.zone/t/swabian-efoil-build/14556/47 "2022-06-20T10:05:02Z")

</div>

Yes, but you can save a lot of more expensive Battery, Inverter, Heat, … if you have a more efficient prop which is more a question of clever design.

---

<div class="post-metadata">

### Author: ![ekotary](https://foil.zone/letter_avatar_proxy/v4/letter/e/cdc98d/32.png) [@ekotary](https://foil.zone/u/ekotary)
#### Post date: [June 27, 2022, 6:28pm UTC](https://foil.zone/t/swabian-efoil-build/14556/48 "2022-06-27T18:28:09Z")

</div>

is this available to purchase? [drkotary@gmail.com](mailto:drkotary@gmail.com)

---

<div class="post-metadata">

### Author: ![Theocerbo](https://foil.zone/letter_avatar_proxy/v4/letter/t/439d5e/32.png) [@Theocerbo](https://foil.zone/u/Theocerbo)
#### Post date: [July 20, 2022, 8:26pm UTC](https://foil.zone/t/swabian-efoil-build/14556/49 "2022-07-20T20:26:49Z")

</div>

Hey Micheal, I would like to print your prop for my lift foil but I need to modify the file to fit the lift motor. Would you share the CAD files? I used the STL to copy the hub, but the blade is a STL and I can’t complete my assembly to check tolerances and fit. If not no worries but figured I would ask! Cheers, Theo

 ![Screen Shot 2022-07-20 at 10.25.46 PM](https://foil.zone/uploads/default/original/3X/b/6/b64de15ef9d6d96651c3b616a788b90e22ef5853.jpeg)  
 ![Screen Shot 2022-07-20 at 10.25.52 PM](https://foil.zone/uploads/default/original/3X/f/a/fa12b3df0bce09fc66c0357e5592fca710d0868c.jpeg)  
 ![Screen Shot 2022-07-20 at 10.25.59 PM](https://foil.zone/uploads/default/original/3X/1/f/1f1f741a51afa1681427d51d4d70c55ac08afb46.jpeg)

---

<div class="post-metadata">

### Author: ![leachim](https://foil.zone/letter_avatar_proxy/v4/letter/l/43a26b/32.png) [@leachim](https://foil.zone/u/leachim)
#### Post date: [July 21, 2022, 11:22am UTC](https://foil.zone/t/swabian-efoil-build/14556/50 "2022-07-21T11:22:08Z")

</div>

Hi Theo, what file format would you need?  
I would not want to upload my Solidworks project data.  
But if a STEP helps i could send you one.

by the way, can you set a delayed speedup in a lift efoil?  
Because if you plan to print the Blades in PETG with epoxy layer.  
You destroy them yery fast if you ramp up to fast.

best regards Michael

---

<div class="post-metadata">

### Author: ![Theocerbo](https://foil.zone/letter_avatar_proxy/v4/letter/t/439d5e/32.png) [@Theocerbo](https://foil.zone/u/Theocerbo)
#### Post date: [July 21, 2022, 12:33pm UTC](https://foil.zone/t/swabian-efoil-build/14556/51 "2022-07-21T12:33:10Z")

</div>

Yes STEP would be great, thank you!

You can’t set the speedup rate on the Lift but I’m planning to print PETG and laminate with carbon fiber. Hopefully it will survive, we will see!

---

<div class="post-metadata">

### Author: ![SoEFoil](https://foil.zone/user_avatar/foil.zone/soefoil/32/55_2.png) [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [July 21, 2022, 2:52pm UTC](https://foil.zone/t/swabian-efoil-build/14556/52 "2022-07-21T14:52:44Z")

</div>

Hey Armin, has this contra-rotating propeller prototype ever been tested ?

> **[Contra-rotating](https://en.wikipedia.org/wiki/Contra-rotating)**
>
> Contra-rotating, also referred to as coaxial contra-rotating, is a technique whereby parts of a mechanism rotate in opposite directions about a common axis, usually to minimise the effect of torque. Examples include some aircraft propellers, resulting in the maximum power of a single piston or turboprop engine to drive two propellers in opposite rotation. Contra-rotating propellers are also common in some marine transmission systems, in particular for large speed boats with planing hulls. Two pr...

---

<div class="post-metadata">

### Author: ![ArminHarich](https://foil.zone/user_avatar/foil.zone/arminharich/32/23830_2.png) [@ArminHarich](https://foil.zone/u/ArminHarich)
#### Post date: [July 22, 2022, 9:16am UTC](https://foil.zone/t/swabian-efoil-build/14556/53 "2022-07-22T09:16:46Z")

</div>

It is in use already: [Candela C-8 first flight: Testing the most premium flying electric boat in the world | Electrek](https://electrek.co/2022/07/13/candela-c-8-first-flight-electric-boat/)

---

<div class="post-metadata">

### Author: ![pablo\_foil](https://foil.zone/letter_avatar_proxy/v4/letter/p/5fc32e/32.png) [@pablo\_foil](https://foil.zone/u/pablo_foil)
#### Post date: [July 22, 2022, 10:12am UTC](https://foil.zone/t/swabian-efoil-build/14556/54 "2022-07-22T10:12:37Z")

</div>

Its good that they provide the efficiency numbers.  
Lets compare it against values reported here for efoils:  
Candela c8: 650 wh/km @1700 kg  
Efoil : 50 wh/km @ 100 kg

So, per kg:  
Candela: 0.38 wh/(kg.km)  
Efoil: 0.5 wh/(kg.km)

I expected a larger difference. Especially since larger vessels should be more efficient

---

<div class="post-metadata">

### Author: ![SoEFoil](https://foil.zone/user_avatar/foil.zone/soefoil/32/55_2.png) [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [July 26, 2022, 5:07pm UTC](https://foil.zone/t/swabian-efoil-build/14556/55 "2022-07-26T17:07:01Z")

</div>

I wanted to now what it costs to print the two blades only with “Strength AND/OR impact resistant” properties on a professional site with high-end materials.  
[https://craftcloud3d.com/](https://craftcloud3d.com/) which also offers a nice viewer btw.  
PEEK is a lightweight, industrial-grade thermoplastic polymer with high-temperature and pressure resistance.  
Carbon-reinforced PEEK is stronger and stiffer than normal PEEK.

PEEK and Carbon fibre PEEK are only available in ASIA (Mantafoil propeller secret material ?)

The interesting part when printing Aluminium, 316L Steel or 17-4 PH Stainless Steel:

- printing costs in Asia are 2 to 4 times **cheaper** than printing in Europe. what we could imagine. However…
- shipping costs Asia to Europe are twice as **less** than printing in Europe and delivering in Europe … just unbelievable !

Prices are in EU/USD. The total cost below is for two blades only, no hub. Ordering the hub in addition would be without extra shipping cost.

| 2 blades only | Print. cost | Shipping | Total cost | Ships from  
To EU |
| --- | --- | --- | --- | --- |
| ABS | 6,59 | 8,33 | 14,92 | |
| HIPS | 6,97 | 11,9 | 18,87 | |
| ASA | 7,66 | 11,9 | 19,56 | |
| PETG | 7,66 | 11,9 | 19,56 | EU |
| polycarbonate | 12,69 | 8,33 | 21,02 | |
| Carbon fibre ABS | 12,82 | 8,33 | 21,15 | EU |
| Carbon fibre PETG | 12,82 | 8,33 | 21,15 | EU |
| FDM   
Polypropylene | 7,15 | 22,48 | 29,63 | |
| FDM Nylon | 7,56 | 22,48 | 30,04 | |
| Carbon Fiber   
FDM Nylon | 8,34 | 22,48 | 30,82 | |
| MJF Nylon   
PA12 | 13,3 | 24,48 | 37,78 | |
| Glass-Filled Nylon | 13,48 | 24,48 | 37,96 | |
| Markforged® Onyx | 19,67 | 41,65 | 61,32 | |
| Carbon Fiber   
Polycarbonate | 29,14 | 33,81 | 62,95 | ASIA |
| **Aluminium** | 44,36 | 24,48 | 68,84 | **ASIA** |
| **316L Steel** | 73,04 | 24,48 | 97,52 | **ASIA** |
| **17-4 PH   
Stainless Steel **| 111,88 | 24,48 | 136,36 |** ASIA** |
| Aluminium | 166,85 | 42,09 | 208,94 | EUR |
| 316L Steel | 220,77 | 42,09 | 262,86 | EUR |
| 17-4 PH   
Stainless Steel | 220,77 | 42,09 | 262,86 | EUR |

| PEEK | 68,39 | 24,48 | 92,87 | ASIA |
| --- | --- | --- | --- | --- |
| Carbon Fiber PEEK | 68,39 | 24,48 | 92,87 | ASIA |

WIKI: PEEK can be processed by conventional methods such as injection molding, extrusion, compression molding etc. Thanks to these properties, PEEK and its composites are widely used in **aerospace, automotive, structural, high temperature electrical and biomedical applications**.

Last question: direct or via a hub ?  
For a 316L print, direct via Sculpteo is -14%, in a EU to EU case.  
The Asian manufacturing price remains unbeatable.

| 2 blades only | Print. cost | Shipping | Total cost | Ships from  
To EU | Site |
| --- | --- | --- | --- | --- | --- |
| 316L Steel | 73,04 | 24,48 | 97,52 | ASIA | Craftcloud |
| 316L Steel | 220,77 | 42,09 | 262,86 | EUR | Craftcloud |
| 316L Steel | 213 | 11,66 | 226,99 | EUR | Sculpteo -14 % |

---

<div class="post-metadata">

### Author: ![manif](https://foil.zone/letter_avatar_proxy/v4/letter/m/c4cdca/32.png) [@manif](https://foil.zone/u/manif)
#### Post date: [September 19, 2022, 4:36pm UTC](https://foil.zone/t/swabian-efoil-build/14556/56 "2022-09-19T16:36:53Z")

</div>

@leachim hi Michael, I really appreciate the time and effort you’ve put into your folding propeller. I am looking into the possibility of producing a community designed and built metal prop for less than 200€ and think your design would be a great candidate. Would you mind us casting and testing your design?  
You can check out the link below.

> [@Community designed/produced folding propellor?](https://foil.zone/t/community-designed-produced-folding-propellor/16532):
>
> (Disclaimer- I’m a total noob with little knowledge on the electrical, hydrodynamic and propulsion systems that are needed for an e-foil build. As such I may misunderstand some stuff so feel free to correct me if I get things wrong. Im here to learn.) Firstly, let me begin by saying there are many contributors here who have embraced the DIY ethos of this community with gusto and provided an excellent foundation of knowledge. Many thanks. Where I’m at Im starting my first e-foil build this win…

Best mani

---

<div class="post-metadata">

### Author: ![Floflo](https://foil.zone/letter_avatar_proxy/v4/letter/f/6f9a4e/32.png) [@Floflo](https://foil.zone/u/Floflo)
#### Post date: [November 14, 2022, 5:00pm UTC](https://foil.zone/t/swabian-efoil-build/14556/57 "2022-11-14T17:00:51Z")

</div>

Hi, would you share your motor mount?

Thanks

---

<div class="post-metadata">

### Author: ![leachim](https://foil.zone/letter_avatar_proxy/v4/letter/l/43a26b/32.png) [@leachim](https://foil.zone/u/leachim)
#### Post date: [November 17, 2022, 1:44pm UTC](https://foil.zone/t/swabian-efoil-build/14556/58 "2022-11-17T13:44:58Z")

</div>

Hi Flo,

I can do, but I am currently very busy with new projects so it’s probably faster if you just design your own one. Mine is also very improvised. There are much better ones out there.

best regards Michi

---

<div class="post-metadata">

### Author: ![Savoie](https://foil.zone/user_avatar/foil.zone/savoie/32/10060_2.png) [@Savoie](https://foil.zone/u/Savoie)
#### Post date: [September 5, 2024, 5:15pm UTC](https://foil.zone/t/swabian-efoil-build/14556/59 "2024-09-05T17:15:22Z")

</div>

Iam also interested in a stp file for the hub. i would like to adapt it for the bolt circle diameter for my engine, but with the stl almost impossible.

---

<div class="post-metadata">

### Author: ![mkefoil](https://foil.zone/letter_avatar_proxy/v4/letter/m/c6cbf5/32.png) [@mkefoil](https://foil.zone/u/mkefoil)
#### Post date: [October 29, 2024, 2:05am UTC](https://foil.zone/t/swabian-efoil-build/14556/60 "2024-10-29T02:05:31Z")

</div>

This is amazing. I’d love to have a filetype that would allow me to change the hole spacing to fit the holes on my Flipsky motors. Any chance you’d be willing to share?

---

<div class="post-metadata">

### Author: ![sebz](https://foil.zone/letter_avatar_proxy/v4/letter/s/d2c977/32.png) [@sebz](https://foil.zone/u/sebz)
#### Post date: [October 4, 2026, 8:28am UTC](https://foil.zone/t/swabian-efoil-build/14556/61 "2026-10-04T08:28:21Z")

</div>

Link to Files: [Efoil 6384/63100 120kv-140kv folding prop by ThermikDreher - Thingiverse](https://www.thingiverse.com/thing:5333943)

[Previous page](https://foil.zone/t/swabian-efoil-build/14556.md?page=2)
