# Swedish rifle case build **URL:** https://foil.zone/t/swedish-rifle-case-build/21418 **Category:** Build, Repair & Mod **Created:** [August 6, 2024, 7:05pm UTC](https://foil.zone/t/swedish-rifle-case-build/21418 "2024-08-06T19:05:07Z") **Posts on this page:** 1 **Showing post:** 10
### Author: ![S\_Roger](https://foil.zone/letter_avatar_proxy/v4/letter/s/9de053/32.png) [@S\_Roger](https://foil.zone/u/S_Roger) #### Post date: [August 6, 2024, 8:11pm UTC](https://foil.zone/t/swedish-rifle-case-build/21418/10 "2024-08-06T20:11:19Z")
here’s a thread where removing the duct made all the difference: > [@Power consumption to high / 70165 120KV motor at fault?](https://foil.zone/t/power-consumption-to-high-70165-120kv-motor-at-fault/20710/54): > > Hey! I printed the Prop that @ludwig_bre send me. Here is my new Log: [Vetr.at Log View](https://vetr.at/yV7fW) The current draw is half of what it was before! So You guys were right, the duct played a huge role and I had the wrong prop. Thanks a lot for all the help, I could not believe that drag plays such a big role, but you have thought me better… This is how it looks now. The print quality of the prop is not good, I will have to reprint it with an 0,2mm nozzle and a smaller layer height and pr… --- _[View the full topic](https://foil.zone/t/swedish-rifle-case-build/21418)._