# Swedish rifle case build

**URL:** https://foil.zone/t/swedish-rifle-case-build/21418
**Category:** Build, Repair & Mod
**Created:** [August 6, 2024, 7:05pm UTC](https://foil.zone/t/swedish-rifle-case-build/21418 "2024-08-06T19:05:07Z")
**Posts on this page:** 1
**Showing post:** 75

<div class="post-metadata">

### Author: ![Foilguy](https://foil.zone/letter_avatar_proxy/v4/letter/f/7cd45c/32.png) [@Foilguy](https://foil.zone/u/Foilguy)
#### Post date: [August 25, 2024, 11:00am UTC](https://foil.zone/t/swedish-rifle-case-build/21418/75 "2024-08-25T11:00:54Z")

</div>

> [@Help with Flipsky 65161 75200 and VX3](https://foil.zone/t/help-with-flipsky-65161-75200-and-vx3/19545/14):
>
> Thanks for the photo . Picture is worth a thousand words!! The Bluetooth module connects to the UART2 port #4 using the cable that feeds from that port. You shouldn’t have anything connected to PPM port #2 I recall having to fiddle with the TX and RX wires to make sure they were connected properly to the correct pins on the Bluetooth module This article might help IF you have that issue. You will also have to config “app” in vesctools for UART When you have it working the VX3 screen will…

---

_[View the full topic](https://foil.zone/t/swedish-rifle-case-build/21418)._