# Tobi's build from Berlin

**URL:** https://foil.zone/t/tobis-build-from-berlin/12585
**Category:** Builds
**Created:** [May 1, 2021, 10:14pm UTC](https://foil.zone/t/tobis-build-from-berlin/12585 "2021-05-01T22:14:25Z")
**Posts on this page:** 1
**Showing post:** 13

<div class="post-metadata">

### Author: ![tosh.jah](https://foil.zone/user_avatar/foil.zone/tosh.jah/32/31884_2.png) [@tosh.jah](https://foil.zone/u/tosh.jah)
#### Post date: [May 16, 2021, 10:58pm UTC](https://foil.zone/t/tobis-build-from-berlin/12585/13 "2021-05-16T22:58:34Z")

</div>

Thanks cristophe!  
Sure here are the links to the files I’ve used for my second motor. It’s 65161 Flipsky on a slingshot mast, be aware of the aft ends. I’ve seen Reachertech, Flipsky and Maytech all selling this motor, just with different ends..

Mast Clamp (may not fit your ketos mast)

> [@Looking for mast clamp file for Slingshot Hover Glide Mast + Flipsky 65161 motor](https://foil.zone/t/looking-for-mast-clamp-file-for-slingshot-hover-glide-mast-flipsky-65161-motor/11489/16):
>
> Thanks received. I uploaded them to thingiverse for ppl looking for them in the future, with appropriate credit given (I think). If any of the original authors prefer I take it off thingiverse, I am happy to do so. Just pm me.

Duct & Hub

> [@Fr 2019 motor system](https://foil.zone/t/fr-2019-motor-system/3762/541):
>
> All good. This one should fit either of the flipsky motors. Sounds like you have a mashup of both motors above. I didnt know about the one with the wider cone. Plus I removed the space for the extra lip seal on the outside as the motor already has two, as I found out. Still has space for the 51101 thrust washer if you choose to use it.

---

_[View the full topic](https://foil.zone/t/tobis-build-from-berlin/12585)._