# Tow boogie general design **URL:** https://foil.zone/t/tow-boogie-general-design/20560 **Category:** Build, Repair & Mod **Created:** [April 20, 2024, 3:58am UTC](https://foil.zone/t/tow-boogie-general-design/20560 "2024-04-20T03:58:53Z") **Posts on this page:** 1 **Showing post:** 100
### Author: ![seagull\_nz](https://foil.zone/user_avatar/foil.zone/seagull_nz/32/37225_2.png) [@seagull\_nz](https://foil.zone/u/seagull_nz) #### Post date: [October 19, 2024, 6:57pm UTC](https://foil.zone/t/tow-boogie-general-design/20560/100 "2024-10-19T18:57:29Z")
I’m a long time follower-first time Builder and slowly putting my Boogie together. I don’t have much electronics experience either but I really love foiling and don’t want to pay ‘off the shelf’ price to get one as I’m not quite the right demographic for that 🙂 I do love how the Zerotow has follow mode though. I think you’ll struggle to buy some of the parts needed and you’re better off buying a 3D printer, as so many awesome designs on this site cannot be purchased, only printed yourself. As far as a complete list goes, this site does have a few lists, but they’re usually quickly outdated with new ideas, designs and products. The [jDubs Dual Motor build](https://foil.zone/t/jdubs-dual-motor-tow-boogie/19048) was a great place to start for me. Also the Creality Ender 3 V3 KE is a very well priced and accessible 3D printer for most of the parts you’ll need. --- _[View the full topic](https://foil.zone/t/tow-boogie-general-design/20560)._