# Ultimate watersports Remote & Receiver

**URL:** https://foil.zone/t/ultimate-watersports-remote-receiver/5238
**Category:** Electronics (ESC, remote, batteries)
**Created:** [August 8, 2019, 3:45am UTC](https://foil.zone/t/ultimate-watersports-remote-receiver/5238 "2019-08-08T03:45:32Z")
**Posts on this page:** 1
**Showing post:** 126

<div class="post-metadata">

### Author: ![samisin](https://foil.zone/letter_avatar_proxy/v4/letter/s/90ced4/32.png) [@samisin](https://foil.zone/u/samisin)
#### Post date: [April 13, 2020, 2:39am UTC](https://foil.zone/t/ultimate-watersports-remote-receiver/5238/126 "2020-04-13T02:39:13Z")

</div>

The enclosure plastic parts design is going very slow! Designing for prototype or proof of concept much simpler than designing for manufacturing and at the same time trying to keep it cheap for low quantity. Water seal, Two shot ejection to bond silicon and abs, makes it very complicated and expensive production process. I have been testing the hardware [with @Hiorth brothers remote design](https://www.thingiverse.com/thing:2781808) with small changes but it is not a good fit for this design! There is no proper space for GPS for example, Or the trigger system is not feasible! there is no reason to have hal sensor outside of the enclosure. Attaches some photos of new design but still needs some serious work. I need to find someone to take over the design and wrap it up

 ![WhatsApp Image 2020-03-22 at 12.52.51 AM](https://foil.zone/uploads/default/original/2X/1/1eb4c320d633c506e38eccec798a38191959a5ad.jpeg) ![WhatsApp Image 2020-03-25 at 1.41.25 AM](https://foil.zone/uploads/default/original/2X/7/746f4fe69857136d85a40eb3fc74911a468189f2.jpeg) ![WhatsApp Image 2020-03-25 at 1.41.25 AM (1)](https://foil.zone/uploads/default/original/2X/2/2e592709e18c8f3364313d63590adde0f2fac672.jpeg)

---

_[View the full topic](https://foil.zone/t/ultimate-watersports-remote-receiver/5238)._