# VESC and problems with UUID from old Handy

**URL:** https://foil.zone/t/vesc-and-problems-with-uuid-from-old-handy/9355
**Category:** Electronics (ESC, remote, batteries)
**Created:** [August 23, 2020, 9:51am UTC](https://foil.zone/t/vesc-and-problems-with-uuid-from-old-handy/9355 "2020-08-23T09:51:41Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![nice2cu](https://foil.zone/user_avatar/foil.zone/nice2cu/32/17766_2.png) [@nice2cu](https://foil.zone/u/nice2cu)
#### Post date: [August 23, 2020, 9:51am UTC](https://foil.zone/t/vesc-and-problems-with-uuid-from-old-handy/9355/1 "2020-08-23T09:51:42Z")

</div>

I had before an LG Mobile and using the metr and Vesc Tool Apps to set all settings.

After my LG broken I want use a new one.  
Metr App still working but when I want use the VESC Tool App I got this message

 ![image](https://efoil.builders/uploads/default/original/2X/e/e5f8594a55d305943df551496719f0163daf1a67.jpeg)

So, I don’t want to open my sealed Aluhousing from my VESC.

Is it possible to remove or set those Settings with the Expert mode from the metr.at App and when yes, where?

---

<div class="post-metadata">

### Author: ![Strongarm](https://foil.zone/user_avatar/foil.zone/strongarm/32/31776_2.png) [@Strongarm](https://foil.zone/u/Strongarm)
#### Post date: [January 24, 2023, 9:04am UTC](https://foil.zone/t/vesc-and-problems-with-uuid-from-old-handy/9355/2 "2023-01-24T09:04:33Z")

</div>

Did you ever figure this out? I’m in the same boat! thanks

---

<div class="post-metadata">

### Author: ![nice2cu](https://foil.zone/user_avatar/foil.zone/nice2cu/32/17766_2.png) [@nice2cu](https://foil.zone/u/nice2cu)
#### Post date: [January 24, 2023, 10:04am UTC](https://foil.zone/t/vesc-and-problems-with-uuid-from-old-handy/9355/3 "2023-01-24T10:04:02Z")

</div>

I opened the aluminum case and read/documented the Code 😉