# VESC Killswitch

**URL:** https://foil.zone/t/vesc-killswitch/20005
**Category:** efoils – Electric Hydrofoil Surfboards
**Created:** [January 15, 2024, 7:51pm UTC](https://foil.zone/t/vesc-killswitch/20005 "2024-01-15T19:51:42Z")
**Posts on this page:** 1
**Showing post:** 4

<div class="post-metadata">

### Author: ![SoEFoil](https://foil.zone/user_avatar/foil.zone/soefoil/32/55_2.png) [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [January 15, 2024, 11:14pm UTC](https://foil.zone/t/vesc-killswitch/20005/4 "2024-01-15T23:14:36Z")

</div>

Have you tried @jeffM solution using a 10k pulldown resistor (ADC2 low)?

> [@Magnet operated kill switch?](https://foil.zone/t/magnet-operated-kill-switch/15715/26):
>
> I found a solution I plug a 10k pull-down resistor on ADC2 and all works fine slight_smile Very happy 0V on ADC2 when kill switch is open 3.3V when kill switch is close [[kill switch on ADC2 (sucess)with 10k pull-down resistor] ](https://www.youtube.com/watch?v=mZv6F6zPLvQ)

---

_[View the full topic](https://foil.zone/t/vesc-killswitch/20005)._