# Wire connectors between Box and Mast

**URL:** https://foil.zone/t/wire-connectors-between-box-and-mast/2621
**Category:** Electronics (ESC, remote, batteries)
**Created:** [August 20, 2018, 9:04pm UTC](https://foil.zone/t/wire-connectors-between-box-and-mast/2621 "2018-08-20T21:04:08Z")
**Posts on this page:** 1
**Showing post:** 29

<div class="post-metadata">

### Author: ![SoEFoil](https://foil.zone/user_avatar/foil.zone/soefoil/32/55_2.png) [@SoEFoil](https://foil.zone/u/SoEFoil)
#### Post date: [December 25, 2019, 2:36am UTC](https://foil.zone/t/wire-connectors-between-box-and-mast/2621/29 "2019-12-25T02:36:31Z")

</div>

Just google “Duotone daytona”. The complete hydrofoil is sold 3000€ or 3600USD 😢 I don’t think that this mast exists as a spare part. Therefore the idea to DiY one see below.

> **[Daytona 105](https://www.duotonesports.com/en/products/daytona-105-44900-3509)**

This mast is part of the Duotone Daytona race foil:  
Mast: 1.05m long, 2.39kg. A 90cm one would weight around 2.0kg. Not bad.

Pictures taken from [Foil Boarding: Duotone Daytona Race Foil Review | Action Sports WA](https://actionsportswa.com.au/2019/12/04/duotone-daytona-race-foil-review/)

Using 10-15 layers of fabrics, It should be possible for a skilled DiYer to make such a monolithic mast in one shot, either around a mold that looks like this mast + vacuum/infusion or inside a 2-part hollow mold plus a compression bladder.  
Other possible building technique: [New build from 3D printed molds (very low cost, but high performance !) - Builds - FOIL.zone](https://efoil.builders/t/new-build-from-3d-printed-molds-very-low-cost-but-high-performance/6031?u=soefoil)

---

_[View the full topic](https://foil.zone/t/wire-connectors-between-box-and-mast/2621)._