yes at least it looks like this one is not designed for efoils⌠wrong cable setupâŚand only 1500W cont. output power⌠Won`t work for most efoil setups;-)
I think the reachert/maytech is much more practible for efoils, however it has problems with the water seal at the shaft. A friend just detached it and saw there is a lot of abrasion and water leak, after only about 10hours usage!
Can you provide electrical diagram (rpm, I, V, torque) and photos of the inside ? I wonât buy if I donât see the inside (need to see rotor and stator). In fact, most of us wonât eitherâŚ
Thank you for these , have you ÂŤ made Âťthis ?
Ok , sorry, inrunner conception : why only choosing a 40mm length , it cannot be made longer ?
Hello Ling.
Why donât you exit the shaft on the other side of housing? Then it would be usable. Right now not usable because wires are exit housing at wrong end.
Hi Toto.
Thank you for your suggestion.
May i know why you want to designed it for this way?
And what product do you use?
because if you saw all of what we build all the wires are in the rear of motor âŚfor cable it come from the mastâŚ
1 Like
Hi Sniper, this motor wire have 850mm, can i push it backwards. Is wire length is workable for efoil tube? Like this picture.
Wires need to be 1.2m long and they need to exit the housing of the motor from the other end to be suitable for efoil
Thank you so much. Luke
1 Like
what is the advantage to use this motor instead some like 500kv sss 56104?
can this deliver the same speed performance compared to 500kv one?
No gear box need but we don t know the efficience vs a motor a with a gearbox
Simply mount the rotor and both endcaps 180 degrees
Not the simple with over lay , but nice idea
Did anyone end up trying this motor?
yeah,we are using this motor for our Searover electric bodyboard
What are the tap holes for?
Any chance you can help me out setting up this motor with vesc? Having issues with little power when in water. I donât have the exact motor but flipsky version