Engine manufacturing

[Chris1]

Hi all I’m french from Paris and I wanted to build an electric foil I will start by making an engine and test it on my paddle before buying a foil for the mounted on it. what do you like me as a motor or can I order parts? you have a link to a tutorial to make the engine
Thanks to all

En français :
Salut a tous je suis français de Paris et je voulais me construire une foil electrique je vais commencer par faire un moteur et le tester sur mon paddle avant d’acheter une foil pour le monté dessus. vous me conseillement quoi comme moteur ou je peux commander les pièces ? vous avez un lien vers un tuto pour fabriquer le moteur merci a tous

[Filip]

Pacificmeister Build Info and CAD Sources

Hello fellow builders! I am releasing all the build info and CAD sources today. I got lots of requests for STL and CAD files. Please feel free to use and change them for your personal foil project. Build, innovate and most important: Please share insights and changes on this forum with everyone else. Here an overview of all the available information: YouTube Build Progress: https://www.youtube.com/pacificmeister Early 2017 I started documenting my design and build process on YouTube. This wa…

This post is a detailed description of a good build. It uses the SSS 500kv motor.

I don’t know much about designing motors, but I’d imagine it would be a lot easier to buy a motor than it would be to make one. It’ll be smaller and have much less drag, and be more efficient and optimized.

[Chris1]

I was not talking about the engine itself but a set with motor delight and waterproof gearbox

[borntosurf222]

Hi Filip and Hi Pacificmeister,
I have watched your build very intently PM (Pacific…) and have been nothing but inmpressed.
When I saw the discussions on designing a motor I was thrilled because it would be a direct drive system.
I was in my first job years ago, responsible for O-ring seals and would like to in future ask more about that aspect versus a shaft seal (I thought I could use simple dynamic o-ring seals but I am no longer sure.
PM I have seen your interest in a direct drive so when I saw this I thought of the forum:

http://www.caroute-outdoor.com/index.php/

Best regards
Peter

[borntosurf222]

SSS 5694 / 800KV Brushless Motor 6 Poles W/O Water Cooling F/ RC Marine Boats ...

Model: 5694
Compatible with: For RC Marine Boats
Material: Silicon steel, Magnetic steel, Bearings
Color: Black
Compatible Fuel Type: Electric
MPN: 5694 / 1200KV
Maximum Amps: 292A
Maximum voltage: 41V
Maximum power: 12000W
Idle Current: 3.9A
Maximum speed: 50K
Magnetic pole: 6 Poles
Tum: 5D
Motor diameter:56mm
Motor length:94mm
Motor shaft diameter:8mm
Wight:900g

[borntosurf222]

The above would allow for a direct drive?