Maytech remote!

My screen Died on my V2 remote. Anybody knows the reference for this screen ?
Thanks !

Hi.

Yes. You need a BEC.

The 5v must be supplied to both the receiver and the Flier ESC through the red PPM wire. You also must have common ground with PPM black wire.

Check this. Lmk.

:call_me_hand:

Someone broke their screen and found a replacement. The link was posted. Maybe you can find it.

1 Like

Thank you guys, I’m dealing with Maytech to know if they can send me the screen + cables directly.

1 Like

Please let us know what they say. I’d like to buy a screen to.

:call_me_hand:

Maytech refused 4 months ago with a pretty lame excuse. Let’s see if they have made some progress:

Using V2 remote with Hifei Swordfish Pro 300A (lite) 4-15s ESC. In “Surfboard” mode, the motor doesn’t spin up until the throttle is at 50-100%. I tried the transmitter throttle/brake calibration several times, but it didn’t help. How can I get the engine running from 1-100% throttle?

In “esk8” mode, the motor will start running 1-100%. The only advantage of having “Surfboard” mode is cruise control.

Thanks.

Remote calibration is only for remote itself to calibrate the joystick.
does your ESC have throttle calibration? If yes, do the calibration with remote in Esurf mode according to the ESC manual. Then it will work.

Maytech did waterproof upgraded on MTSKR1905WF remote, now better waterproof performance, see below how is it upgraded:

Order them from below link:

On Aliexpress:
https://www.aliexpress.com/item/32971538055.html?spm=5261.ProductManageOnline.0.0.6b194edfV1WC6a

On Maytech website:
https://maytech.cn/collections/speed-controllers-and-remotes/products/mtskr1905wf-ip67-waterproof-esk8-esurf-remote

I bought the 1905WF about a year ago, both last summer and this summer I have had quite a lot of connection issues when I start. I am using it to control a tow boogie so I am about 8-10m from the receiver. I notice that I get much more stable connection if I shorter the distance but I would prefer a longer line to the boogie. I have tried to find out what the expected range is on these but no information.

Anyone have had similar problems? Anyone tried mounting an external antenna on the remote as well?

Except it is not waterproof. Mine started taking on water (visible at the screen) almost right away and now it is completely dead. Very disapointed!

Even added silicone around the screen because I was afraid of water intrusion since other people wrote about it but water must have gotten in somewhere else.

What is the warranty on the remotes?

Definitely not waterproof.

I also had issues where the receiver would freeze on high throttle. I have now gone to the Flipsky V3 and it is brilliant.

Maytech don’t have any warranty and will not replace anything.

So, you recognised there was a problem and you have attempted to fix it. Did you replace / refund all those who bought the previous version which had the problem?

Wow getting stuck at full throttle is even worse! So dangerous!

Gonna order a flipsky v3 right away!

What are the dimensions of Maytech receiver?
Please help me. I need it for modeling…

What is that large part ? Looks like a relay…

1000067077

This is the pump relay.

1 Like

Unfortunately both my receivers are filled with silicone, but you can estimate the dimensions by this model. Maytech remote control receiver box by strepod - Thingiverse

2 Likes

Models - Great idea! :blush:
Pump relay, great - I can remove it…