Routing of 6384 motor cable inside aluminum mast

[sat_be]

Definitely on the side, try to route the cables through the mount. This is a 63100, cables enter the mast unter the plasic part.

Daniels (un)geared inflatable (slowly built)

Update: Ungeared my setup! After some trouble with a cold fused alu prop to the stainless steel shaft, I had to destroy parts of the geared motor pod. It worked well but was a bit long and heavy. I also did not want to bother about water ingress into the pod any longer, therefore I went for a 63100 run wet. [IMG_9458] coated stator and rotor with epoxy [20807AFE-D46A-4001-92DE-AFA75C3FC200] [DHBE3888] [06DAD754-53B8-4A31-830F-4C0E28CEA266] Also replaced the ESC, the Flier went up in s…