Hi all,
I was wondering if anyone would be interested in this efoil board (board only) as seen on the pictures?
This was my first efoil board build and it worked absolutely fine. Now that I have build my second board, everything from electronics, cables, mounting brakets etc… has been transfered to the new board. This leaves me with the stripped board and nowhere to store it.
The board is made from 2 X 300g fiberglass on top, 3 X 300g fiberglass on bottom and rougly 5 X 300g on the sides as top and bottom is overlaying each other.
There is quite a lot of glue residue left behind in the battery/electronics compartment - I guess this can easily be removed with some chemicals.
There is a poorly repaired dent in the nose section in the fiberglass (see pictures) which was made in a bit of a hurry 
Everything is as it is shown in the pictures and obviously it need some attention, but other than that - I think it can be reused for a small amount of money and time. All difficult parts like the threaded inserts for the mast, the hatch seal, and more is taken care of.
Board dimensions:
L = 1650mm
W = 600mm
H = 150mm
I was thinking like 50 euros + shipping (from Denmark) - but I am open for offers
