Pom is not necessary.
I have a similar design all parts printed. No need for screws to fix the cap, just click and go.
8 Likes
I am still working on my design, but I was planning to use a similar mounting method, and a cooling pass-thru in the center like this. It also helps with printing the nose cone, as it removes the centermost section that is a bit challenging for the FDM process.
4 Likes
That’s truly german over-engineering 
Love the design
3 Likes
What mast are you using in the above?
I’m using Rene’s RL Mast and also the complete RL eFoil Wing Kit (old Version). Just type “RL Mast” or “RL efoil” in the search bar and you will find some Posts about it
2 Likes
Hey guys,
our “Weapon of mass consumption” is entering the hot phase. A passive cooled HGLtech Hi 75/200 Vesc, mounted in a waterproof aluminium box will do the scutwork. It comes with 10AWG motorcables and 3 x XT60 plugs battery-sided. I cutted those (yay! free plugs) and soldered the 3 x 12AWG to a 8AWG cable. I also cutted the RJ45-plugs from an old networkcable and used it to extend the PPM+UART port of the Vesc to a second waterproof plasicbox which will be placed in the upper front of rifle case.
Metr-modul for wireless configuration+logging and Maytec Rx for PPM input
the electronics-box mounted on the stiffener-plate directly in front of the rivet nuts
5 Likes
So people, now it’s getting serious. We have actually landed far below 2000€.
For all those who want to build an Efoil now should use these components (as of January 2021).
Quiet motor, high quality battery pack (waterproof), passively cooled VESC (waterproof). High quality carbon Foil.
It took us less than one day (23h) to build everything!
| BOM | |||
|---|---|---|---|
| shipping | |||
| Flipsky 65161 120KV | banggood.com | 269,00 € | 8,00 € |
| VESC HI200 75V 200A | hgltech.com (coupon HGLTECH20) | 161,00 € | 10,00 € |
| RL Foil Set (Shark) | rlboards.com | 420,00 € | 15,00 € |
| Battery 16S9P 30Q | nkon.nl | 460,00 € | 10,00 € |
| Maytech Eskate remote | aliexpress.com (MTSKR2005WF) | 80,00 € | 20,00 € |
| Max case 004 | max-koffer.de | 24,00 € | 5,00 € |
| Nuprol X-Large Hard Case | kotte-zeller.de | 120,00 € | 12,00 € |
| stiffer plate | Local Laser shop | 53,00 € | 0,00 € |
| Item profile 30x30 | ebay.de | 20,00 € | 6,00 € |
| aluminium case 172 x 121 x 54.9 | voelkner.de | 16,00 € | 5,00 € |
| stuff | AS150 connectors, 8 AWG cables, screws, SikaFlex | 50,00 € | 0,00 € |
| 1.673,00 € | 91,00 € | ||
| 1.764,00 € | |||
| working hours | |||
| [h] | |||
| propulsion unit | motor mount, cut POM piece, assembly of foil | 5 | |
| battery | spot welding, soldering, prepare waterproof hard case | 7 | |
| board assembly | screw stiffer plate to board, seal screw holes, install rivet nuts | 6 | |
| VESC box | soldering, install cable glands, programming | 4 | |
| remote | waterproofing remote with Epoxy | 1 | |
| 23 hours |
16 Likes
Nice BOM ! When do you think will be the first tests ?
One can find this item with 1 or 3 m extension antenna for 95usd (February 2021 Chinese New Year sale):
Thanks for the link. Well it’s winter in Germany…
Haha @SoEFoil, glad you asked for the first test;)
We will release the result soon…feel free to vote
Current results:
8 Likes
Nooo! Why did you go for the RL Shark foil…? you will not be able to push that case to 25kmh+ for lift-off.
Go for the superb E-foil dedicated foils where you have lift-off at 15kmh and you stand a chance…
I am sure, he will lift off 
:mortar_board:
It’s not the Shark, it’s the RL efoil Wing with around 1200cm²
Saw now in the video it’s the 2018 RL with 800mm width and ca 1100cm2. It’s my favorite allround wing sofar after testing 7 different. You will be successful! The Bom is balanced and good.
With a proper wing and 5kw to start with you can strap it to a toaster and still fly.
Go Germany!
5 Likes
At the top obviously you’re going to take off
Your list is nice, but either you got special prices or they were on special sale… F. e hgltech Hi200 75/200 is 265$ and much more expensive than on your list?
I took the voucher and got 20% off. I paid $199,20 USD incl. shipping
1 Like
Yes!
20chars20chars20chars
What different foils did you tested so far? Which is the best one after the RL foil in your opinion?
In order of appearance
Naish surf XL
RL Efoil 2020 (1600cm2)
RL Efoil 2018 (1100cm2) favourite allrounder
Axis 900/460 stb. Super efficient, but slow. Sold again
Gong veloce M/40cm stab. Nervous, but with potential for 40kmh+
Fliteboard flyer / std stab. Too early to say…
3 Likes