We have one remote left! Of the three, two don’t work after two seasons. And in the third there was a spot of moisture on the screen. Flipsky needs to be improved! But how?
Hi,
the second black seal I glued on; not part of the original hatch.
Its this one:
" SCHWARZBERG Self-adhesive sealing tape, universal, 6 mm x 3 mm x 5 m, thermal tape insulating for windows and doors, foam made of cell rubber"
Hello everyone I want to express my gratitude to the FLPSKY Official store.In place of my damaged remote control with sea water, I was sent a new one!
FLPSKY Official Store
Remember this photo. My friend made me present! In the image and likeness! These are such cool T-shirts turned out!Thanks to him!
Hello everyone My first esc flipsky, worked honestly for almost three seasons, died! Died slowly! At first, I began to measure the battery voltage incorrectly, overestimated its volts by ten. Because of this, esc was disabled. Having changed the shutdown threshold in the program, they rolled back another season. As a result, the capacitors could not stand it, they died! I did not repair it. Bought a new 75200 without water cooling! Here he comes! I think I’ll have time to deliver it before the weekend! And test it! Close the season!
With aluminum integrated with integrated aluminum board.
They put powerful capacitors!
The new esc didn’t fit into my old aluminum box, I had to buy a new one, and there it stuck! And I had to raise it higher with the help of an copper tire, since the wires from the mast will be released in the center of the esc.
The new esc is installed and tested! Everything works perfectly! When determining the motor by the tool vesc program, the maximum motor current was determined as 100 amperes. I didn’t change anything, I decided to try. With the Flite screw at the stop, the battery current at full power was only 40 amps. I had to raise the motor current to 170 amperes. And the board went! With a Flite screw and 1100 square wings, I managed to accelerate to 40 km. h! The trigger of the remote was not squeezed out to the end. There was a strong wind and ripples on the water. I fell! I did not experiment further. In good weather conditions, I think it will accelerate to 45 km.h.! This is with my weight of 95 kg! And for a screw with a pitch of 5 inches, 120 amps of tuning would be enough! I am happy with the result!
