Hard to see on the picture, but we needed to add some “blocks” with threads to hold down the VESC onto the base plate. We used superglue. Drilling a hole in the baseplate and threading it could be an option, but as it’s only 5mm thick at that point we decided to do it this way.
Using the original VESC aluminium L clamp with the glued blocks for securing the VESC.
This stuff ( PLASTIK 70 ) does wonders (and smells great)
The VincentRemote with it’s GPS puck fixed to the lid of the “Vesc” box.
Remote signals are no problem, however the GPS lock does need some time!
We have replaced the 3D printed lid (picture above) with a CNC’ed perspex version.
Potting of the VESC. The green gasket has been 3D printed with NinjaFlex.
