I just used a laser tachometer.
Which firmware for vwsc are you using?
I’m using Vesc Tool 3.00 and “no_hw_limits” firmware.
Thank you…
i cant get this motor to work well with my vesc.
Up to 100A it is ok, i get speed and power but lack some more for plaining and liftoff.
As i give it more throttle motor is takeing more amps but it dosnt accelerate more, and if i hold it longer on higher currents it actualy loses rpm and power…
i realy dont know what is happening…
i am using makerX HI200 vesc, do you use the same one?
At first I used a makerX HI200 vesc with a rifle case, but it quickly overheated and I switched to a Flypsky FSESC 75200.
Hmm then it sould work with HI200 (i have water cooling).
I hope upgrade to 5.3 firmware and redoing motor setup will help with my issue.
Did you do the water cooling yourself? Can you take a photo?
Clarification. I have the Go-FOC HV200 version (100v )
Water cooling block, some tubing, and you need to make intake in front of the mast. i dont have pictures of that… i will try to get them when i get home today.
1 Like
Hi200 and hv200 are the same, Hv200 have mosfets with higer voltage rating…i think…
Any link ? 20char char char
2 Likes
Looks great, let us know how does the new design hold on… And we would love to have a link for FR prop. xd
Br
Write to the seller that you want to buy only the propeller and he will explain how to do it.
This version is for FR motor shaft, it needs to be modified in case of use with motor shaft 65161
1 Like
Great, could I just ask how much did you pay at the end for prop?
Approximately 100 euros with delivery.
Nice…
this flypsky sould work great.
how much did you pay for motor?
Also do you maby have old working settings for 66160 that you can export?
True I would love to see your settings!
Finaly menaged to get my setup working…
After firmware update to 5.3 and tuning some settings ( foc frequency from 30-60khz) and reducing observer gain bay half, decoupling desabled) i menaged to get planing nad foiling.
Finaly motor has power and speed…
2 Likes
Nice, good job! Enjoy riding"
BR