Thatās good! Thatās just a FYI for people starting their build thinking that they absolutely must cut the corners of their VESC! 
and, what would you want to say with theme?
Well, if they have the space Iād tell them to get a bigger enclosure so they donāt have to cut their VESC 
Okay, but i not cut my VESC, i cut only something from the Alucoolingblock. So he fits perfectly into the enclosure. Also i add Pads for better transfering the temeratures to the enclosure and from that outside to the aluminium plate.
1 Like
Looking forward if the passive cooling will also handle 100amp continuous over longer period. You want to go fast, donāt you? 
after my son broken my duct, I decided to make some modifications.
So, I will ride now without and hope on the weekend I will be reach >40 km/h 
3 Likes
Not with 12s and FR prop! Maybe if you run 14s. Soon I will test my Samurai propellor on your motor (120kv), this will be fast.
Hehe 14s go brrrrrr. 
@nice2cu
can you please tell me the thickness of the alu blades of your prop?
Iām going to mill my own prop out of alu, but Iām afraid of vibrations during machining.
thx
Nice. Is it a FR prop ? Would you test with and without the nose-shaped boss end ? I ask because David FR prefers straight, without cone (more silent).
Did you get any difference with and without The endcap.
It would be intressting to know if someone have done and tested a vortex diffuser to a FR propeller.
I would guess We should be able to gain some efficiency if we get a good shape to it 
1 Like
No, because i got my metr Dongle not working good.
When i fixed that problem, then I can measure the difference.
hi heddan99,
many thanks for the link! i do a simple test on my system this weekend with an v2 steel endcap with little blades
greetings
1 Like
And what is the result?
sorry my bad english. " i will do it this weekend 19.9 "
but please you can post a picture here before
Today after work I drove to the Wolfgangsee lake.
I tried again after iOS and metr Update to got good data, but see, still something is not working 
.I am a carpenter . but think the project made of stainless steel spinner with blades will be good. more power can only be achieved through more power ā¦ or how was that? i dont know realy ā¦
more on that soon. iām really looking forward to the first flight with it
robert, iām also looking forward to the e-foil meeting in austria soon!
3 Likes
Hi,
Iām fighting exactly like you with the Metr/Ios and Maytech Combo.
I told you before that it seems to help to go 9600baud compared to 115200 that is std.
Today I made another finding as I moved my phone up from my board and keep it at my chest. I can now get BT Metr data for about 5min instead of 20s before having to reboot Metr App.
The problem is very likely to be the Maytech remote which is 2,4Ghz and operates at BT range (without certification). Easiest would be to get 433Mhz remotes, but whereā¦
Fun test is to turn on the Maytech close to normal 100Mhz FM radio. Mine went completely disturbed
Anyone with Android using Metr + Maytech remote combo who can comment if you have it working or same radio disturbance?
BR,
Mattias
I also tried to put the mobile in my box, next to the antenna from the metr Dongle.
Still the same problem!
I try to set the Baud rate to 9600 but it seems to me it is not a really good solution.
In our German speaking Group a lot of guys using metr without any problem the metr dongle.
A lot have the similar configuration like me.
Flipsky motor
VESC
the cheap 30$ Remote
But I think a Android device.
I bought before extra for that a IP68 Android Phone butā¦ after first water test the phone was full of water and damaged, the second one an LG ThinQ phone was also not water resistant.
So at moment I have only my iPhone XS for thatā¦
I think about if I should buy a Samsung XCover 4 for that. But I must be sure it is a problem with iOS devicesā¦