THE NEW Shadow prop family

Happy New year everyone!
Please stop posting about other makers products in this thread guys :sweat_smile:.

I donā€™t understand what you mean at all :sweat_smile:. When creating a propeller we donā€™t make only 1 pitch model. We have virtually all the pitches available. Ranging from 1ā€ if this was ever needed to 15ā€ if this can be used. To be clear, we have ā€¦, 5ā€, 5.5ā€ 6ā€,ā€¦ as well. And our hub is 45mm. It has always beā€¦
Please allow me to tell you that yes this is available elsewhere in the market, for at least 1 year.

Kindly open your own thread to discuss your products there. Iā€™m sure there is lots to discuss too.

Best regards,
FWS

Being totally honest, this thread switched to essyfoil because you posted false statements about them when @thorlex just mentioned them, instead of asking to keep on the thread back then.
As for the 5,5 pitch, what easyfoil ment was that, as far as he knew, noone else was selling these props, meaning that they were designed in house, so they are not copycats

I donā€™t agree. Part, if not all he said is true and no one tells it. You know what ? I would be happy to show you and @JetboardCologne how you THINK you know something but actually donā€™t lol. Iā€™ll wait till Easy opens his thread (if he ever does. I feel like he wonā€™t :smiley:).

Designed in house ? not copycats ? Have you and the genius @JetboardCologne ever used a 3D software with free modeling capabilities ? Do you know you can import a mesh and change the geometry inside the mesh while keeping some area untouched as it was ? haha I have so much to say but will do this later on another thread.

Sorry @FirnasWatersports I couldnā€™t resist. You guys didnā€™t even ask him if he has this model and just bashed him instead, then talk about ā€œassumptionsā€ when this is a diy forum, then again about ā€œfalse assumptionā€ when you couldnā€™t even spot the difference between a GS5 and a legit PS5. This is truly unbelievableā€¦


Sorry again @FirnasWatersports, not going to respond to this here anymore. Letā€™s get back to the main topicā€¦

Milled and printed

LOL :joy:

1 Like

Guys pleaseā€¦

I will check with Jasmin if we can set up a pre order batch on his webshop. If we get 50+ orders (hopefully in the 60+) we can guarantee a price of 160ā‚¬ / piece (one time batch price, for early people - freight and VAT not included). Production would be planned end of february ideally (will confirm).

As we said we have all the possible pitches, CW or CCW is up to the community. But, to get this price, the whole batch needs to be the same. I believe most of you might be interested in the 7" variant in CCW, so this is what we will set up on the webshop. Finish is matte / hard anodized black. Propeller will be suited for Maytech / Flipsky threaded shafts.

Let me know if you guys want something else.

EDIT : Prop dimensions for Maytech / Flipsky motors (diameter is 150mm) :

2 Likes

Have you considered casting or molding to reduce unit costs? There are some carbon reinforced plastic combos that are very similar to billet 6061 T6. Please lmk if I can be helpful.