I like the little flag, will be using one too. Did you extend the antenna to the flagpole? If so, how did you do it, original antenna and an extension wire? It’d be great if you could link the parts you used.
I’m close to starting the build phase on my tow, routing of the electrics and cooling is finished 
How long did you make the masts now? And would you be able to share the flipsky 6384 propeller file? thank you!
It’s 25 cm now and the propellers files were modified by a professional to fit to the Flipsky motors, he didn’t give me the file.
I showed my son a YouTube video of a tow boogie last night and it looks like I need to make one now. Can anyone point me to a post that has a list of all the necessary parts? I looked but couldn’t find one very readily. I will read through everything more thoroughly this weekend , but I just want to see everything I may need all in one place. I will build a plywood shell/board, but I would be hoping to buy and not 3d print the other parts. But if I have to I can 3d print smaller parts.
I’m a long time follower-first time Builder and slowly putting my Boogie together. I don’t have much electronics experience either but I really love foiling and don’t want to pay ‘off the shelf’ price to get one as I’m not quite the right demographic for that 
I do love how the Zerotow has follow mode though. I think you’ll struggle to buy some of the parts needed and you’re better off buying a 3D printer, as so many awesome designs on this site cannot be purchased, only printed yourself. As far as a complete list goes, this site does have a few lists, but they’re usually quickly outdated with new ideas, designs and products. The jDubs Dual Motor build was a great place to start for me. Also the Creality Ender 3 V3 KE is a very well priced and accessible 3D printer for most of the parts you’ll need.
What depth do you recommend for the motors? In other words, what is the distance from the bottom of the board to the motor axles?
Also the Bambuu labs A1 printer is fantastic and well.priced…easy software and great qulity prints at high speed… My two cents.
K
That’s a few hours printing time😅
It’s good for choppy water but I need to have a long tow bar because of too much nose up when I start.
I’ll try to lower the tow point like 15cm with a short bar to see if it has the same effect.
Are you enjoying this more than your old setup, the 4’6 Wavepower?
It’s not a real game changer I’d say. Both are good in terms of stability.
You say that the strength of printed parts is not sufficient. I completely agree with you. Why not make the most important parts out of metal? For example, the motor bracket can be welded out of stainless steel and printed fairings can be made for it. I could not keep my balance on my electric foil with a homemade wing. So I designed and ordered a stainless steel stand so that I could hold on to it like a scooter handlebar. It was made for me using laser cutting and welding. It turned out to be a very good stand. Surely in your city you can find services for the production of metal structures.
Thanks for the advice. There have already been many metal mast clamp designs with a plastic fairing. As for the scooter handlebar, especially the metal one, I am against them. It is a dangerous and unnecessary element in my opinion. It is better to focus on acquiring a normal wing, this will contribute more to progress.
Agree, i see my teeth being smacked out by that in just a small crash.
Boogie for auto follow filming, is there such a thing?
Sounds simple but think of the compliexity and reliability of follow function of something like a modern DJI drone (Mavic 3 etc) or Skydio
I agree with that. I practiced with the handlebar and have already removed it. I just used it as an example.
There was another reason for using it. i couldn’t get the radio control to work and had to use a wired throttle like on an electric scooter. Now the radio problems are solved.
Has anyone thought of trying to create a water tight inflatable compartment similar to strongarms commercial zero tow? It makes a lot of sense and was a brilliant idea. I can really see why the zero tow has it.
Has anyone thought about a DIY version? I’m sure it would be tricky but might not be impossible……
You can pick up some of the parts needed.
There wouldn’t be any need for the drop stitching. It would get in the way and the pressure would be low compared to an I sup.
The seams and the connection to the hard hull of the boogie would need a lot of thought. The hull would need to be solid (not a foam board) to ensure good adhesion.
Thoughts? Worth the effort? I’m ok at shaping and building my own sups and surfboards but the thought of a smaller package when deflated for storage is another big bonus.
