Efoil V3 - STL files for Gong foil and Flipsky motor 12mm - Parts list - Schematics

In this scenario not amazing, it’s usual, lol :slight_smile:
I have received email from flipsky about prop.
They have said that it possible buy prop separately for 120kv model, and that they have developed this prop for 120kv model, but I don’t see any difference with prop for 100kv motor, but we all on this forum knows that prop for 100kv motor required some “fixing” in case 120kv motor

Motor proposed from flipsky as “motor developed for 120kv”

the same (?) prop on Banggood

I don’t see any difference… and you?

I was checking mast clamp back and front stl files but I dont see nut placement to tighten mast front and and back part! Wondering how you managed to secure front part to back clamp after screwing motor in the back part

Now I see how it works! the right question is what is the screw size

M5 X100

https://fr.aliexpress.com/item/33007566910.html?spm=a2g0s.9042311.0.0.27426c370XM6he

no difference only the shaft

1 Like

Test new prop shape today 18A vs 23A old shape. Very nice :slight_smile: but I have some whistling

5 Likes

Great project, Congratulations

I builds an efoil with a similar setup, currently completing parts

I have a questions … is this an additional capacitor? What are the parameters?

What is the diameter of the propeller after modification

looks like a relay? 2020202020 char

1 Like

Yes it’s a relay. it’s my safety system. this relay cut the power when the rider fall.
there is a old post on the forum, where I explain for my 1st e-foil the system.
I don’t remember exacly where

1 Like

Thanks, I found it :slight_smile:

1 Like

what is the maximum speed you can reach with your board ??

1 Like
1 Like

https://flipsky.net/collections/electronic-products/products/high-current-fsesc-200a-60v-base-on-vesc6

Just to short questions I would love to get a reply for !

  1. what is the maximum speed you can reach with your board ?

  2. How many volts has your battery ?

did you not have any esc damage by cutting the power under load?

Love your setup. Great!

New ride yesterday with the new prop, lower speed
46 minutes, 18A without duct. There was 25% battery left.

3 Likes

[DavidF]
did you not have any esc damage by cutting the power under load?

=> no damage to my 3 Efoil and I have the same safety system

[Invisible]
Just to short questions I would love to get a reply for !

  1. what is the maximum speed you can reach with your board ?
    => this E-foil is not build for the speed due to a big wing, it’s build for the cruising at lower speed
    and ride a maximum time

  2. How many volts has your battery ?
    => 12S (50V) 22AH

1 Like

new prop diam 132mm old 125mm

picture after sanding and painting

1 Like

Thank you, your latest post has helped me a lot and I think it is very cool how long your efoil drives with one battery charge.

That’s fine but I still want to know how fast you can be.
And do you think I could foil with a GONG WINGFOIL ALLVATOR VELOCE M when I use the same flipsky motor like you (I am 70kg)